User Manual

Added functions in NUAGE V1.7 81
5. Press the [Multi function button A] that
corresponds to the “Insert” you want to
change the parameters of.
NOTE
Instead of steps 4 and 5, by quickly pressing the [e] button of
1 to 8 in the CHANNEL STRIP section of the Nuage Fader
twice, you can call up the parameters of the plug-in being
inserted to the corresponding channel. In this case, the
selected insert will be switched each time you quickly press
the [e] button twice.
6. Turn the 16th [Multi function knob] from the
left of the Nuage Fader CHANNEL STRIP
section (the far right knob), then select a
parameter.
Four parameters will be displayed at the same time.
7. Turn the [Multi function knob] or press the
[Multi function button] corresponding to the
parameter and change the parameter’s value.
The value you change to will immediately be applied.
NOTE
• You can press the 10th [Multi function button A] from the
left to compare it to the parameter before editing.
Press the button again to return to the changed value.
• You can press the 11th [Multi function button A] from the
left to bypass the “Insert.”
Press the button again to return to turn the bypass off.
Insert A or E
Insert B
Insert C
Insert D