NX-E100 Speaker System Systeme D’enceintes ·›`n „‚¸‚m スピーカシステム OWNER’S MANUAL MODE D’EMPLOI ¤ˇ¥˛»¡'œfi 取扱説明書 1
Thank you for selecting this Yamaha NX-E100 speaker system. PRECAUTIONS Read these precautions carefully before using your speaker. • Any time you note distortion, reduce the volume control on the receiver to a lower setting. Never allow the receiver to be driven into “clipping”. Otherwise the speaker may be damaged. • When using a receiver with a rated output power higher than the nominal input power of the speaker, care should be taken never to exceed the speaker’s maximum input.
PLACING THE SPEAKERS • Place the speakers on a sturdy, vibration-free surface. You may not be able to obtain good bass quality when the speakers are placed directly on the floor. Put a block, etc. under the speakers. • Better stereo images will be obtained when the speakers are slightly angled in towards the listening position. SPECIFICATIONS Type ............................ 2-way bass-reflex speaker system (Magnetically-shielded type) Driver .................................................
Printed in Taiwan 12 V440310
