AB NX-U10 USB POWERED SPEAKER OWNER’S MANUAL
Thank you for selecting this Yamaha product. CAUTION: Read this before operating your unit. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 1 Install this unit in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/ or cold. (Do not use/keep this unit in a car etc.) 2 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.
FEATURES ◆ 3 way power supply You can choose one of three power supplies according to your usage circumstances: USB bus power, USB/AC adaptor or batteries. ◆ Digital sound reproduction The USB connection provides clear sound with little noise. ◆ Real stereo sound The high quality amplifier, titanium diaphragm and Yamaha’s unique SR-BASS technology achieve high quality sound. ◆ High 20 W power Yamaha’s original power technology enables an impressive 20 W output (Max. Instantaneous Power).
CONNECTIONS Use the procedure below to choose one of the three power supplies according to your usage circumstances. 1 When using USB bus power (this page) 2 When using the USB/AC adaptor (page 4) 3 When using batteries (page 5) Notes • Before connecting, make sure that POWER switch on this unit is turned off. • Before connecting, make sure that VOLUME dial on this unit is set to the minimum.
■ Installation of USB drivers The installation procedure is variable depending on OS. After “Common operations” below, follow the installation procedure for your OS. • You may need the CD-ROM of the OS running on your computer to install the device drivers. For details, refer to the manuals of your computer. • The following installation procedures for the device driver installation method may not be applicable to certain PC environments.
When the inserted Windows 98SE CD-ROM is not recognized If this error occurs during installation of USB Audio Device: Window: [Disc insertion] (Error message) T Click [OK] Window: [Open] “Drive (V):” (Pull-down menu) Select the drive in which the CD-ROM is inserted “Folder (F):” (Field) Select [win98] “Filename (N):” (Field) Select [driver21.
3 When using batteries 2 1 Concave portion Turn the battery holder upside-down. 3 4 Battery holder Metal plates Battery holder Computer, Portable audio player etc. Protrusions B 6 Protrusions A 1 With the front protrusions A of the battery holder being aligned with the protrusions B of the battery holder tray on the right, snap the battery holder into the battery holder tray by pressing down the near side first. 2 Press down the far side of the battery holder into place with a click.
USING THIS UNIT 1 2 3 Press POWER to turn this unit on. (The status indicator (LED) lights up.) Start playback of your computer’s media player or your portable audio player. Adjust the volume level using VOLUME on this unit. About the status indicator (LED) LED status The current status of this unit Lit This unit is on. Off This unit is off, or power supply is not connected. Turning on and off repeatedly Limiter control has been activated due to excessive input.
TROUBLESHOOTING If the problem you are experiencing is not listed below, set this unit to off, disconnect the power, and contact the nearest authorized Yamaha dealer or service center. General Problem Cause Remedy No sound. The connection between this unit and the portable audio player or computer is not collect or securely. Connect securely. The volume is set to the minimum. Increase the volume.
©2007 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND SCANDINAVIA A.B.
