User manual

8-13

7. Add the specified amount of the recommend-

ed engine oil, and then install and tighten the

engine oil filler cap.

Tightening torque:

Engine oil drain bolt:

8 Nm (0.8m·kgf, 5.8 ft·lbf)

Recommended oil:

See page 10-1.

Oil quantity:

0.8 L (0.84 US qt) (0.70 Imp.qt)

NOTICE

Do not mix any chemical additives. Do

not use oils with a diesel specification

of "CD" or oils of a higher quality than

specified. In addition, do not use oils

labeled "ENERGY CONSERVING II" or

higher.

the crankcase.

8. Start the engine, and then let it idle for several

Make sure that no foreign material enters

minutes while checking it for oil leakage. If oil

is leaking, immediately turn the engine off and

check for the cause.

9. Turn the engine off, wait at least ten minutes,

and then check the oil level and correct it if

necessary.