Owner`s manual

24
Speed & Fuel meter
unit
Changing settings (custom mode)
Switching to custom mode
In the custom mode, you can change the
meter function settings. Each setting func-
tion number is displayed in the speedometer
display.
1. Turn the engine off and the engine start
switch to ON.
2. (4 seconds): To activate the cus-
tom mode.
3. (1 second): Press to switch
between the setting function numbers
and to switch to the change settings dis-
play.
4. Change each setting and return to the
normal display. To change the settings,
see the corresponding sections for each
setting function.
NOTE:
If no operations are carried out for 30 sec-
onds or more or if the engine is started, the
settings will not be applied and the display
returns to the normal display.
01 (setting displayed units)
You can change the units that are shown in
each display. The indicator of the selected
display blinks.
1. Turn the engine off and the engine start
switch to ON.
2. (4 seconds): To activate the cus-
tom mode and to switch to the change
settings display.
3. : Press to switch between the dis-
plays.
* In the display example, the speedometer
is shown.
01 (setting displayed units)
03 (setting correction value)
02 (setting fuel sensor)
(1sec.)
(1sec.)
(1sec.)
FLOW (fuel flow)
TRIP (trip)
Speedometer
DPTH (depth)
TEMP
(ambient water temperature)
TTL (total fuel consumption)
ECON (fuel economy)
Blinks
Changing settings (custom mode)/01 (setting displayed units)