User Manual

146 Genos Reference Manual
The explanations here apply when you call up the “Receive” display in step 2 on page 143. This determines which
Part is used for each MIDI channel when the MIDI data is recognized by this instrument.
1 For each Channel, select the Part which is to handle the MIDI data of the corresponding
channel received from the external MIDI device.
When connecting via USB, MIDI data of 32 channels (16 channels x 2 Ports) can be handled by this instrument.
With the exception of the two parts below, the configuration of the parts is the same as those already explained
elsewhere in the Owner’s Manual.
• Keyboard: The received note messages control the instrument’s keyboard performance.
• Extra Part 1–5: These five parts are specially reserved for receiving and playing MIDI data. Normally, these
parts are not used by the instrument itself.
2 Touch [>] to call up the other page then select which MIDI messages are to be received
for each Channel.
Receive—MIDI Receive Channel Settings
MIDI transmission/reception via the USB terminal, Wireless LAN, and MIDI terminals
The relationship between the MIDI terminals, Wireless LAN and the [USB TO HOST] terminal which can be used
for transmitting/receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as follows:
1 2
The dots corresponding to each channel (1–16) flash briefly whenever
any data is received on the channel(s).
Lets you alternate between two pages.
 MIDI reception
Port handling
USB2USB1
MIDI A 01–16 MIDI B 01–16
MIDI A 01–16 MIDI B 01–16
Merge Merge
 MIDI transmission
MIDI A OUT
terminal
USB
connector
MIDI B OUT
terminal
MIDI A IN
terminal
USB
connector
MIDI B IN
terminal
Wireless
LAN
Wireless
LAN
The wireless LAN function may not be included depending on your area.
NOTE