User Manual
1) Turn the instrument on and wait until the Home display appears.
2) Press the [MENU] button to call up the Menu display.
3) Touch [Utility] on the Menu display.
4) Touch [System].
5) Check that the version number matches the current upgrade.
1) The power supply was cut off or the USB flash drive was removed during operation.
A complete reinstall is necessary. Perform the operation again from the beginning.
2) The installation cannot be executed and an error message appears in the display.
Check the following:
✓ Is the USB flash drive inserted correctly?
✓ Is the USB connector free from dust or dirt?
✓ Is all required data located in the root directory of USB flash drive?
✓ Is the USB flash drive or the upgrade data itself damaged in some way?
✓ Does the data correspond to the instrument?
Try installing it again by using another USB flash drive.
Confirm the version number
Troubleshooting