User Manual

106 Genos Reference Manual
4 Record the specific part of the track using the one of the meth-
ods you have selected in Step 3.
 Manual Punch In/Out:
4-1
Touch [] (Rec) to engage the record mode.
4-2 Touch [>/o] (Play/Pause) to start record mode playback.
4-3 Touch [] again to start actual recording (Punch In).
4-4 When finished playing, touch [>/o] (Play/Pause) to stop recording (Punch
Out).
The playback pauses and the actual recording of one range finishes.
4-5 Touch [] (Stop) on the display to exit the record mode.
 Pedal Punch In/Out:
The point at which you press the footswitch (of the ASSIGNABLE FOOT PEDAL 2 jack) is the Punch In point
and the point at which you release the pedal is the Punch Out point.
4-1 Touch [] (Rec) to engage the record mode.
4-2 Touch [>/o] (Play/Pause) to start record mode playback.
4-3 Press and hold the footswitch to start actual recording (Punch In).
4-4 When finished playing, release the footswitch to stop recording (Punch Out).
The playback pauses and the actual recording of one range finishes.
4-5 Touch [] (Stop) on the display to exit the record mode.
 Auto Punch In/Out:
4-1
Touch [] (Rec) to engage the record mode.
4-2 Touch [>/o] (Play/Pause) to start record mode playback.
Playback starts from four seconds before the Punch In point, then the actual recording is automatically starts
and stops at the specified Punch In/Out points. Playback automatically stops four seconds after the Punch
Out point.
5 To hear your new recording, touch [>/o] (Play/Pause).
If you’ve made a mistake or you’re not completely satisfied with your performance, undo the Punch In/Out opera-
tion by touching [Undo] on the display.
The playback sound of the other track
(not selected as the destination of
recording) is not recorded to the track.
We recommend re-recording only one
range at one time. This is because the
Undo/Redo function can undo/redo
only one range that was recorded imme-
diately before.
NOTE
NOTE