User Manual

144 Genos Reference Manual
The explanations here apply when you call up “System” display in step 2 on page 143.
System—MIDI System Settings
Clock Determines whether the instrument is controlled by its own internal clock (“Internal”) or a
MIDI clock (“MIDI A,” “MIDI B,” “USB1,” “USB2,” and “Wireless LAN”) received from
an external device. “Internal” is the normal Clock setting when the instrument is being used
alone or as a master keyboard to control external devices. If you are using the instrument with
an external sequencer, MIDI computer, or other MIDI device, and you want to synchronize it
to that device, set this parameter to the appropriate setting: “MIDI A,” “MIDI B,” “USB1,”
“USB2,” or “Wireless LAN.” In this case, make sure that the external device is connected
properly (e.g., to the instrument’s MIDI IN terminal), and that it is properly transmitting a
MIDI clock signal. When this is set for control by an external device (“MIDI A,” “MIDI B,”
“USB1,” “USB2,” or “Wireless LAN”), the Tempo is indicated as “EXT.” in the Tempo dis-
play.
Transmit Clock Turns MIDI clock (F8) transmission on or off. When set to “Off,” no MIDI clock or Start/
Stop data is transmitted even if a Song or Style is played back.
Transpose MIDI Input Determines whether or not the instrument’s transpose setting is applied to the note events
received from the external device via MIDI.
Start/Stop Determines whether incoming FA (start) and FC (stop) messages affect Song or Style play-
back.
Local Control Turns the Local Control for each part on or off. When Local Control is set to “On,” the key-
board of the instrument controls its own (local) internal tone generator, allowing the internal
Voices to be played directly from the keyboard. If you set Local to “Off,” the keyboard and
controllers are internally disconnected from the instrument’s tone generator section so that no
sound is output when you play the keyboard or use the controllers. For example, this allows
you to use an external MIDI sequencer to play the instrument’s internal Voices, and use the
instrument keyboard to record notes to the external sequencer and/or play an external tone
generator.
System
Exclusive
Message
Transmit Determines whether MIDI System Exclusive messages are transmitted (On) or not (Off) from
this instrument.
Receive Determines whether MIDI System Exclusive messages are recognized (On) or not (Off) by
this instrument.
Chord System
Exclusive
Message
Transmit Determines whether MIDI chord exclusive data (chord detect. root and type) are transmitted
(On) or not (Off) from this instrument.
Receive Determines whether MIDI chord exclusive data (chord detect. root and type) are recognized
(On) or not (Off) by this instrument.
If the Clock is set other than “Internal,” the Style, Song, Metronome and Tempo cannot be controlled by the buttons
on this instrument.
NOTE
“Wireless LAN” is shown only if the wireless LAN function is included. The wireless LAN function may not be
included depending on your area.
NOTE