User Manual

40 Genos Owner’s Manual

This section covers how to enter characters for naming your files/folders, inputting keywords on searching file, etc.

Entering characters is done in the display shown below.

1 Touch the character type.

Touching [Symbol] (or [abc]) switches between entering symbols or Roman letters

(and numbers).

To switch between entering capital letters or small letters, touch (Shift).

2 Touch []/[], rotate the Data dial or the press [DEC]/[INC] but-

tons to move the cursor to the desired location.

3 Input the desired character one by one.

To delete a single character, touch [Delete]; to delete all characters at once, touch

and hold [Delete]. To enter a space, touch the space key indicated in the illustra-

tion above.

4 Touch [OK] to finalize the characters (name, keywords, etc.)

you have input.

Entering Characters

2, 3

• Depending on the display for charac-

ter entry you are working in, some

types of characters cannot be entered.

• A file name can contain up to 46

characters and a folder name can

contain up to 50 characters.

• The following characters (half size)

cannot be used: \ / : * ? " < > I

To cancel this operation, touch [Cancel]

before going on to step 4.

NOTE

To input letters with auxiliary symbols:

You can input letters with auxiliary symbols such as an umlaut by touching

and holding a letter to call up a list. For example, touch and hold “E” to enter

“Ë” from the list.

To select custom icons for files (shown at left of file name):

You can select custom icons for the file. Touch [Icon] to call up the pop-up

window, then select the desired icon.