User Manual

6 Genos Owner’s Manual
Notices and Information
NOTICE
To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.
 Handling
• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument,
TV, or radio may generate noise. When you use the instrument along with an application on your iPad, iPhone or iPod touch, we recommend
that you set “Airplane Mode” to “ON” on that device in order to avoid noise caused by communication.
• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car
during the day) to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating
temperature range: 5° – 40°C, or 41° – 104°F.)
• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
 Maintenance
• When cleaning the instrument, use a soft cloth. Do not use paint thinners, solvents, alcohol, cleaning fluids, or chemical-impregnated wiping
cloths.
 Saving data
• Edited Song/Style/Voice/MIDI setup data, etc. are lost when you turn off the power to the instrument without saving. This also occurs when
the power is turned off by the Auto Power Off function (page 24). Save the data to the instrument, or to USB flash drive/an external device
such as a computer (page 37). Saving the data to USB flash drive/an external device is even more secure, since the data in the instrument
may be lost due to some failure, an operation mistake, etc. Before using a USB flash drive, make sure to refer to page 111.
• To protect against data loss through USB flash drive damage, we recommend that you save your important data onto spare USB flash drive or
an external device such as a computer as backup data.
• System Setup data (data other than the edited Song/Style/Voice/MIDI setup data, etc.) is automatically stored, when you change the settings
in a display page and then exit from that page. However, the data is lost if you turn off the power without properly exiting from the relevant
display. For information about the System Setup data, refer to the Parameter Chart of the Data List on the website.
• If the power switch is not turned on for longer than about a week, the time (clock) setting may be lost.