User Manual

66 Genos Owner’s Manual
 [BREAK] button
This lets you add dynamic breaks in the rhythm of the accompaniment. Press the [BREAK]
button during Style playback. When the one-measure Break pattern finishes playing, Style
playback automatically shifts to the Main section.
Using the Joystick
By moving the joystick in a horizontal (X) or vertical (Y) direction, you can bend the notes up or down, or apply modu-
lation effects. Move the joystick to control the sound while playing the keyboard.
 X: Pitch Bend
Bends notes up (by moving the joystick to the right) or down (by moving the joystick to
the left) while playing the keyboard. This is applied to all keyboard parts (RIGHT 1–3 and
LEFT).
 Y: Modulation
The Modulation function applies a vibrato effect to notes played on the keyboard. By
default, this is applied to the keyboard parts RIGHT 1–3. You can set whether the modula-
tion effects produced by the joystick will be applied or not to each keyboard part indepen-
dently: [MENU]  [Keyboard/Joystick]  [Joystick]  Modulation (+), Modulation (-).
About the lamp status of the section buttons (INTRO/MAIN VARIATION/BREAK/ENDING)
• Red: The section is currently selected.
• Red (flashing): The section will be played next, following the currently selected section.
* The MAIN VARIATION [A]–[D] button lamps also flash in red when the fill-in is playing.
• Blue: The section contains data but is not currently selected.
• Off: The section contains no data and cannot be played.
Expressively Controlling Your Performance
+X-X
-Y
+Y
• The maximum pitch bend range can
be changed on the display called up
via [MENU]  [Keyboard/Joystick]
 [Joystick].
• The Pitch Bend effect may not be
applied to the LEFT part during Style
playback, depending on the Style set-
ting.
NOTE
The Modulation effects may not be
applied to the LEFT part during Style
playback, depending on the Style set-
ting.
NOTE