Product guide

Product Guide

To change the line-in encoding setting, select one of the following options:

• Using a handheld Sonos controller: From the Settings menu, select Advanced Settings -> Audio Compression.

• Using the Sonos Controller for PC: Select Manage -> Settings -> Advanced.

• Using the Sonos Controller for Mac: Select Sonos -> Preferences -> Advanced.

For additional information on connecting audio devices, you can go to our Web site at http://faq.sonos.com/cables.

Surround Speakers

You can easily pair two PLAY:1 or PLAY:3 speakers with a PLAYBAR to function as left and right surround channels in your

Sonos surround sound experience. For more information, go to http://faq.sonos.com/surround.

If you have a CONNECT:AMP and speakers, the release of Sonos software update 4.2 makes it possible to configure the

CONNECT:AMP for surround use. Both the CONNECT:AMP and the PLAYBAR must be wired in this configuration—this is a

requirement only when configuring a CONNECT:AMP for surround. It is not a requirement for normal use of these products.

Set up CONNECT:AMP surround

Note: If this is a newly purchased CONNECT:AMP, be sure to add it to your Sonos system

before attempting to set up surround speakers.

Connect the PLAYBAR to your router with an Ethernet cable.

2. Connect the CONNECT:AMP to your router, or to the PLAYBAR, with an Ethernet cable.

3. Attach desired speakers to the CONNECT:AMP (power rating should be at least 75W for 8 Ohm speakers and at least

150W for 4 Ohm speakers.)

4. Position the speaker connected to the Left terminal on the CONNECT:AMP as the left surround speaker in your surround

sound setup.

5. Position the speaker connected to the Right terminal on the CONNECT:AMP as the right surround speaker in your

surround sound setup.

Note: Make sure your PLAYBAR is not currently configured with any other surround

speakers. It can be configured with a SUB.