ENGLISH Electronic Piano P-140/P-140S lectronic iano ESPAÑOL FRANÇAIS DEUTSCH Owner’s Manual Bedienungsanleitung Mode d’emploi Manual de instrucciones EN DE FR ES
SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind.
IMPORTANT SAFETY INSTRUCTIONS INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK, AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST. WARNING- When using any electrical or electronic product, basic precautions should always be followed. These precautions include, but are not limited to, the following: 1.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: ENGLISH Power supply/AC power adaptor Water warning • Only use the voltage specified as correct for the instrument.
Connections Handling caution • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. Also, be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. • Do not insert a finger or hand in any gaps on the instrument.
ENGLISH Introduction Thank you for purchasing the Yamaha Electronic Piano P-140/P-140S! We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the P-140/P-140S. We also recommend that you keep this manual in a safe and handy place for future reference.
About this Owner’s Manual This manual consists of three main sections: Introduction, Reference and Appendix. Introduction (page 6): Please read this section first. Reference (page 14): This section explains how to make detailed settings for the P-140’s various functions. * The illustrations and displays as shown in this owner’s manual are for instructional purposes only, and may appear somewhat different from those on your instrument.
Table of Contents ENGLISH Introduction Main Features..................................................... 6 About this Owner’s Manual ............................... 7 Accessories ......................................................... 7 Application Index ............................................... 9 Panel Controls and Terminals.......................... 10 Before Using the P-140 .................................... 12 Turning the Power On ...............................................
Application Index Use this index to find reference pages that may be helpful for your particular application and situation. Listening Listening to demo songs with different voices.....................................................................Listening to the Demo Songs on page 14 Listening to my recorded performance................................................................................................Playing Back Songs on page 34 Listening to commercially available Music Data ...............
Panel Controls and Terminals Panel Controls and Terminals 2 3 4 5 6 7 8 9 ENGLISH 1 Rear panel ™ & Front panel 10 P-140 Owner’s Manual * ( º ¡ )
Panel Controls and Terminals @ # 1 [STANDBY/ON] switch ................ page 12 For turning the power on or off. $ % ^ @ [–/NO], [+/YES] buttons For adjusting the volume level of the entire sound. For setting values or performing file operations. Pressing both buttons simultaneously for certain value settings (Transpose, Tempo, etc.) restores the default value. 3 [DEMO] button............................ page 14 # Voice group buttons ....................page 19 2 [MASTER VOLUME] slider .........
Before Using the P-140 Before Using the P-140 Turning the Power On 1. Connect the power adaptor’s DC cable to the [DC IN 12V] jack. ENGLISH 2. Plug the AC adaptor into an AC outlet. WARNING Use the specified adaptor (PA-5D, PA-150, or an equivalent recommended by Yamaha) only. The use of other adaptors may result in irreparable damage to both the adaptor and the P-140. CAUTION Unplug the AC Power Adaptor when not using the P-140, or during electrical storms.
Before Using the P-140 Using the Pedals Sustain Pedal (Sustain Pedal jack) This jack is for connecting the included pedal (FC3). The pedal functions in the same way as a damper pedal on an acoustic piano. Connect the included pedal (FC3) to this jack and press the pedal to sustain the sound. The further down the pedal is pressed, the longer the sound will be sustained (can be used like a half pedal effect).
Listening to the Demo Songs Reference Listening to the Demo Songs Demo songs are provided that effectively demonstrate each of the P-140’s voices. ENGLISH 1 2 3 4 4 3 1. Press the [STANDBY/ON] switch to turn the power on. When the power is turned ON, one of the voice button indicators will light. NOTE Demo song data is not transmitted via the MIDI terminals. 2. Adjust the volume. Initially set the [MASTER VOLUME] slider about half way between the “MIN” and “MAX” settings.
Using the 50 Piano Preset Songs Using the 50 Piano Preset Songs Listening to the 50 Piano Preset Songs The P-140 provides performance data of 50 piano songs. You can simply listen to these songs (page 58) or use them for practice (page 16). 15 2 ENGLISH 4 3 1. Press the [SONG SELECT] button a few times until the “PRESET” indicator lights. 2. Press the [–/NO], [+/YES] buttons to select the number of the tune you want to play. The number will appear on the display.
Using the 50 Piano Preset Songs Practicing a One-Hand Part Using the 50 Preset Songs (Part Cancel Function) The 50 preset songs have separate left- and right-hand parts on individual parts. You can turn the left- and right-hand parts on or off as required so you can practice the corresponding part (the part that is turned off) on the keyboard. The right-hand part is played by [RIGHT] and the left-hand part is played by [LEFT]. ENGLISH 3 2 1 1. Turn off the playback part you wish to practice.
Using the 50 Piano Preset Songs Starting playback automatically as you start playing the keyboard (Sync Start) When the Sync Start function is engaged, playback of the selected preset song will begin automatically as soon as you start playing on the keyboard. To engage the Sync Start function, simultaneously hold down the [STOP] and press the [PLAY/PAUSE] button. Repeat the previous operation to disengage the Sync Start function. Playback will then start as soon as you begin playing the keyboard.
Using the 50 Piano Preset Songs A-B Repeat for the 50 Preset Songs The A-B Repeat function can be used to continuously repeat a specified phrase within a preset song. Combined with the Part Cancel function described below, this provides an excellent way to practice difficult phrases. ENGLISH 4 23 1. Select and play a preset song. 2. Press the [TEMPO/FUNCTION] button at the beginning of the phrase you want to repeat. This sets the “A” point ( will appear on the display). 3.
Selecting & Playing Voices Selecting & Playing Voices Selecting Voices 1 ENGLISH 1. Select the desired voice by pressing one of the Voice buttons. [OTHERS] button [OTHERS] button Pressing the [OTHERS] button switches among the following seven voices. o 1 CHURCH ORGAN o 2 JAZZ ORGAN o 3 STRINGS o 4 HARPSI CHORD o 5 E. CLAVI CHORD o 6 VIBRAPHONE o 7 SPLIT For details about “o 7 SPLIT,” refer to page 21.
Selecting & Playing Voices Combining Voices (Dual) You can play voices simultaneously across the entire range of the keyboard. In this way, you can combine similar voices to create a thicker sound. ENGLISH 12 1. Press two voice buttons at the same time (or press one voice button while holding another) to engage Dual. The voice indicators of both selected voices will light when Dual is active. Play the keyboard. NOTE Two voices in the [OTHERS] button cannot be engaged at the same time.
Selecting & Playing Voices Splitting the Keyboard Range and Playing Two Different Voices (Split) Split enables you to play two different voices on the keyboard — one with the left hand and another with the right hand. For example, you can play a bass part using the Wood Bass or Electric Bass voice with the left hand, and a melody with the right hand. Bass voice ENGLISH Split point (default setting: F#2) Melody 234 5 1 1.
Selecting & Playing Voices 3. Select a voice for the right hand. ENGLISH A voice for the right hand can be selected from the following 13 voices in the FUNCTION display. For details, refer to pages 37, 42. 1 GRAND PIANO 1 2 GRAND PIANO 2 3 GRAND PIANO 3 4 PIANO & STRINGS 5 ELECTRIC PIANO 1 6 ELECTRIC PIANO 2 7 ELECTRIC PIANO 3 8 CHURCH ORGAN 9 JAZZ ORGAN 10 STRINGS 11 HARPSICHORD 12 E.
Selecting & Playing Voices Adding Variations to the Sound – [VARIATION] [VARIATION] button [VARIATION] BRIGHT: NORMAL: MELLOW: Bright tone Standard tone Soft and mellow tone To select a variation type, press the [VARIATION] button a few times until the indicator corresponding to the desired type lights (the indicator lights in sequence each time you press the [VARIATION] button). Variation can be selected among three types.
Selecting & Playing Voices Selecting a Reverb/Effect type – [REVERB]/[EFFECT] [–/NO][+/YES] buttons [REVERB] button [EFFECT] button ENGLISH [REVERB] This control enables you to select various digital reverb effects for adding extra depth and expression to the sound and creating a realistic acoustic ambience. OFF: ROOM: HALL 1: HALL 2: STAGE: NOTE The default reverb type (including OFF) and depth settings are different for each voice. When no reverb effect is selected, no REVERB indicator is lit.
Selecting & Playing Voices Touch Sensitivity – [TOUCH] [–/NO] [+/YES] buttons [TOUCH] [TOUCH] button NOTE HARD: Requires that the keys be played quite hard to produce maximum loudness. MEDIUM: Produces a fairly “standard” keyboard response. SOFT: Allows maximum loudness to be produced with relatively light key pressure. FIXED: All notes are produced at the same volume no matter how hard the keyboard is played. (No indicators are lit.) The fixed volume can be changed.
Selecting & Playing Voices Transposition – [TRANSPOSE] The P-140’s Transpose function makes it possible to shift the pitch of the entire keyboard up or down in semitone intervals to facilitate playing in difficult key signatures, and to let you easily match the pitch of the keyboard to the range of a singer or other instruments. For example, if you set the transposition amount to “5,” playing key C produces pitch F.
Selecting & Playing Voices Using the Metronome The P-140 features a built-in metronome for convenience in practicing and use with the Recording features. 12 [–/NO] [+/YES] buttons ENGLISH [TEMPO/FUNCTION –, +] buttons 1. Press the [METRONOME] button to start the metronome. The metronome sound is turned on. The beat indicator flashes at the current tempo.
Recording Your Performance Recording Your Performance The ability to record and play back what you’ve played on the P-140 keyboard can be an effective practice aid. You can, for example, record just the left-hand part, and then practice the right-hand part while playing back the recorded left-hand part. Or, since you can record up to two parts separately, you could record the left- and right-hand parts separately, or record both parts of a duet and hear how they sound when played back.
Recording Your Performance mode. This automatically selects an empty number (U01-U03) for recording and makes the RIGHT part active. If all song numbers contain recorded data, Song U01 will be selected. This simply enables recording; to start recording, go on to step 3. The amount of memory available for recording is shown on the display in approximate kilobytes. You can record up to a maximum of about 11,000 notes on the P-140 depending on pedal usage and other factors.
Recording Your Performance Re-recording a previously recorded song If you are not satisfied with the recording, you can record it again. Using the following operation. 1. Select a voice or voices (and other settings) for recording, if necessary. Repeat step 1 on page 28 if you wish to change the previous settings. 2. Press the [REC] button again to re-engage Record ENGLISH Ready mode. The selected part’s indicator lights in red.
Recording Your Performance Recording to RIGHT/LEFT This lets you record the right and left parts separately. Since you can record the left part while playing back the right, this is useful for independently recording both parts of a duet. 2 3 2 1. Make all the initial settings. Same as step 1 in “Recording a performance quickly” on page 28. 2. Select a song to record. Press the [SONG SELECT] button so that the “USER” indicator lights then press the [–/NO][+/YES] buttons to select a song for recording.
Recording Your Performance The user song recorder records the following data: ENGLISH Data in addition to the notes and voices you play is recorded. This data includes “Individual Parts” and “Entire Song.” See below.
Recording Your Performance Changing the Initial Settings (data recorded at the beginning of a song) The initial settings (data recorded at the beginning of a song) can be changed after the recording. For example, after recording, you can change the voice to create a different ambience or adjust the song tempo to your taste. You can change the following initial settings.
Playing Back Songs Playing Back Songs The following three types of songs are available. • 50 Piano Preset Songs NOTE 50 Piano Preset Songs in the instrument. (page 15) You cannot select songs during Demo Song playback (page 14). • User songs in the instrument User songs which you recorded to the instrument by using the record function (page 28).
Playing Back Songs 3. Press the [PLAY/PAUSE] button to start playback. The current measure number appears on the display during playback. NOTE User song playback cannot be started when the recorder contains no data. NOTE Adjust the tempo You can use the [TEMPO/FUNCTION –, +] buttons to adjust the playback tempo as required before or during playback. The default tempo (the song’s original tempo) is set when you press the [–] and [+] buttons simultaneously. 4.
Detailed Settings – [FUNCTION] Detailed Settings – [FUNCTION] You can set various parameters to make the best use of P-140 functions, such as fine tuning the pitch or selecting a scale, etc. The following parameters are available. The P-140 has nine main functions. Some of these main functions consist of a set of sub-functions. Functions List Function ENGLISH Display Reference page Fine tuning of the pitch — F1. 39 Selecting a scale Scale F2.1 40 Base Note F2.2 40 Dual Balance F3.
Detailed Settings – [FUNCTION] Basic Procedure in Function Follow the steps below to use the functions. If you become lost while using a function, return to this page and read the basic procedure. 5 3 1. Press the [TEMPO/FUNCTION] but- NOTE ton to enter the Function. Functions cannot be selected during Demo/Song Select or when the user song recorder is in operation. The [FUNCTION] indicator lights. When you call up the FUNCTION display after turning the power on, appears on the display.
Detailed Settings – [FUNCTION] 5. Use the [–/NO] and [+/YES] buttons NOTE to change the ON/OFF setting, select the type, or change the value. After you select the function, the current setting will be displayed when the [–/NO] or [+/YES] button is pressed for the first time. The default setting (which is used when you first turn on the power to the P-140) is recalled by pressing the [–/NO] and [+/YES] buttons simultaneously. 6. Press the [TEMPO/FUNCTION] to exit the Function.
Detailed Settings – [FUNCTION] About Each Function The explanations here apply when entering the Function in step 5 on page 38. You can fine tune the pitch of the entire instrument. This function is useful when you play the P-140 along with other instruments or CD music. Use the [–/NO] and [+/YES] buttons to lower or raise the pitch of the A3 key in approximately 0.2 Hz increments. ..... .....
Detailed Settings – [FUNCTION] F2. Selecting a Scale You can select various scales. Equal Temperament is the most common contemporary piano tuning scale. However, history has known numerous other scales, many of which serve as the basis for certain genres of music. You can experience these tunings with the P-140. ENGLISH F2.1: Scale Setting range: EQUAL TEMPERAMENT The pitch range of each octave is divided equally into twelve parts, with each half-step evenly spaced in pitch.
Detailed Settings – [FUNCTION] You can set various parameters for Dual (page 20) to optimize the settings for the songs you play, such as adjusting the volume balance between two voices. Dual function settings are set individually for each voice combination. If Dual is not engaged, will appear instead of and you will be unable to select the Dual functions. If this happens, press two voice buttons at the same time to engage Dual. F3.
Detailed Settings – [FUNCTION] F4.3: Right Voice Selection F4. Split Functions ENGLISH This menu enables you to make various detailed settings for Split. By selecting the right/left voices, changing the split point or other setting, you can optimize the settings for the songs you play. Be sure to select the Split by pressing the [OTHERS] button before engaging Function. If Split is not engaged, will appear instead of and you will be unable to select the Split functions.
Detailed Settings – [FUNCTION] F5.3 Sustain Sample Depth This section provides a variety of other functions, including letting you assign the operation of the AUX pedal to one of several settings, and allowing you to select specific song channels for playback. Setting range: 0 – 20 Default setting: 12 The GRAND PIANO 1, 3 voice features special “Sustain Samples” that recreate the unique resonance of an acoustic grand piano’s soundboard and strings when the sustain pedal is pressed.
Detailed Settings – [FUNCTION] F6. Metronome Volume Use this function to adjust the metronome volume. Setting range: 1 – 20 Default setting: 10 NOTE ENGLISH SHORTCUT: You can jump directly to the metronome functions by pressing the [TEMPO/FUNCTION] button while holding the [METRONOME] button. F7. Song Part Cancel Volume This function sets the volume at which a “canceled” part is played during song playback.
Detailed Settings – [FUNCTION] F8.4: Program Change ON/OFF F8.6: Panel/Status Transmit Normally the P-140 will respond to MIDI program change numbers received from an external keyboard or other MIDI device, causing the correspondingly numbered voice to be selected on the corresponding channel (the keyboard voice does not change).
Detailed Settings – [FUNCTION] ENGLISH F9. Backup Functions You can back up some settings, such as voice selection and reverb type, so that they will not be lost when you turn off the power to the P140. If the backup function is turned on, the settings at power off are effective. If the backup function is turned off, the settings in memory are erased when you turn off the power. In this case, when you turn on the power to the unit, the default settings (the initial settings) will be used.
Connections Connections Connectors CAUTION Before connecting the P-140 to other electronic components, turn off the power to all the components. Before turning the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may result. 2 3 4 ENGLISH 1 1 MIDI [IN] [OUT] terminals Use MIDI cables to connect external MIDI devices to these connectors. MIDI [IN]: Receives MIDI data. MIDI [OUT]: Transmits MIDI data.
Connections 3 AUX PEDAL Jack This jack is for connecting an optional FC4/FC5 foot switch or FC7 foot controller. A wide range of functions such as the Soft Pedal function, etc. can be assigned to this jack. Use the Function settings to assign the function. (page 43) NOTE Depending upon the pedal that is connected to the AUX PEDAL jack, the effect produced by operating the pedal (ON/OFF, dynamics, etc.) might be reversed. If this happens, refer to the “AUX PEDAL Type” section (page 43).
Connections Connecting a Personal Computer By connecting a computer to the USB [TO HOST] or MIDI terminals, you can transfer data between the instrument and the computer via MIDI. To do this, install the USB MIDI interface (such as the UX16, UX96, or UX256) driver and Musicsoft Downloader software. There are two ways you can connect the P-140 to a computer: 1. Connecting the USB port on the computer to the P-140 via a USB MIDI interface. 2. Using a MIDI interface and the P-140’s MIDI terminals.
Data Backup Using a Computer Data Backup Using a Computer For maximum data security Yamaha recommends that you save your important data to your computer by using the Musicsoft Downloader (MSD) software. This provides a convenient backup if the internal memory is damaged. Data that can be saved ENGLISH ● Panel settings and recorded User songs Panel settings are the same data that can be backed up using the Backup Functions (page 46). You can save the panel settings and recorded User songs as one file.
Message List Message List Comment CLr* Displayed after factory presets are recalled. con Displayed when Musicsoft Downloader is started on a computer connected to the instrument. When this message appears, you cannot operate the instrument. E02 Displayed when the song data is damaged. E04 Indicates that the song data is too large to be loaded. End Displayed when the current operation is completed.
Troubleshooting Troubleshooting ENGLISH Problem Possible Cause and Solution The P-140 does not turn on. The P-140 has not been plugged in properly. Securely insert the female plug into the socket on the P-140, and the male plug into a proper AC outlet (page 12). A click or pop is heard when the power is turned on or off. This is normal when electrical current is being applied to the instrument. Noise is heard from the speakers or headphones.
Preset Voice List Preset Voice List : Yes : No Stereo Sampling Touch Response Dynamic Sampling*1 Key-Off Sampling*2 Voice Descriptions 1 GRAND PIANO 1 Recorded samples from a full concert grand piano. Also includes three levels of dynamic sampling, sustain samples, and key-off samples for exceptionally realistic acoustic grand piano sound. Perfect for classical compositions as well as any other style that requires acoustic piano. 2 GRAND PIANO 2 Spacious and clear piano with bright reverb.
Preset Voice List : Yes : No Split Left Voice List ENGLISH Voice Name 54 Stereo Sampling Touch Response Dynamic Sampling*1 Key-Off Sampling*2 Voice Descriptions 1 WOOD BASS An upright bass played fingerstyle. Ideal for jazz and Latin music. 2 BASS & CYMBAL Adds a soft ride cymbal to the bass sound. Ideal for walking bass lines in jazz tunes. 3 E. BASS 1 Electric bass for a wide range of music styles, jazz, rock, popular, and more. 4 E. BASS 2 A fretless bass.
Index Index Numerics F 50 Piano Preset Songs .....................................................15 Factory Setting List ......................................................... 59 FCL (display)................................................................... 51 A-B Repeat.......................................................................18 Adjust Tempo (50 Piano Preset Songs) ...............................15 Tempo (Recorded Songs) .........................................
Index Pedals ...............................................................................13 [TEMPO/FUNCTION] button................................ 27, 37 [PHONES] jack ...............................................................13 [TOUCH] button............................................................ 25 Pitch ➝ Fine Tuning of the Pitch...................................39 Touch Sensitivity............................................................. 25 [PLAY/PAUSE] button ..................
ENGLISH MEMO P-140 Owner’s Manual 57
Appendix Preset Song List / Liste der voreingestellten Songs / Liste des morceaux prédéfinis / Lista de canciones preseleccionadas No. 58 Title Composer 1 Invention No. 1 J.S.Bach 2 Invention No. 8 J.S.Bach 3 Gavotte J.S.Bach 4 Prelude (Wohltemperierte Klavier I No.1) J.S.Bach 5 Menuett G dur BWV.Anh.114 J.S.Bach 6 Le Coucou L-C.Daquin 7 Piano Sonate No.15 K.545 1st mov. W.A.Mozart 8 Turkish March W.A.Mozart 9 Menuett G dur W.A.Mozart 10 Little Serenade J.
Factory Setting List / Liste der Vorgabeeinstellungen / Liste des réglages / Lista de ajustes de fábrica Default Voice GRAND PIANO 1 Dual OFF Split OFF Split Right Voice Backup Group F9.1 GRAND PIANO 1 Split Left Voice WOOD BASS Variation NORMAL Reverb Type Preset for each voice Reverb Depth Preset for each voice Effect Type Preset for each voice Effect Depth Preset for each voice Touch Sensitivity F9.4 F9.
MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI If you’re already very familiar with MIDI, or are using a computer to control your music hardware with computer-generated MIDI messages, the data provided in this section can help you to control the P-140.
4. PROGRAM CHANGE 7. SYSTEM EXCLUSIVE MESSAGES (Yamaha MIDI Format) Data format: [CnH] -> [ppH] CnH = Program event (n = channel number) ppH = Program change number P.C.#=Program Change number Voice Name GRAND PIANO 1 GRAND PIANO 2 GRAND PIANO 3 PIANO & STRINGS ELECTRIC PIANO 1 ELECTRIC PIANO 2 ELECTRIC PIANO 3 CHURCH ORGAN JAZZ ORGAN STRINGS HARPSICHORD E.CLAVICHORD VIBRAPHONE MSB 0 0 0 0 0 0 0 0 0 0 0 0 0 LSB 122 112 123 125 122 122 123 123 122 122 122 122 122 P.C.
(2) Universal Non-Realtime Message (GM On) General MIDI Mode On Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] -> [F7H] F0H = 7EH = 7FH = 09H = 01H = F7H = or F0H = 7EH = XnH = Exclusive status Universal Non-Realtime ID of target device Sub-ID #1=General MIDI Message Sub-ID #2=General MIDI On End of Exclusive Exclusive status Universal Non-Realtime When received, n=0~F.
MIDI Parameter Change table (SYSTEM) Address (H) Size (H) Data (H) 00 00 00 4 020C - 05F4* 01 02 03 04 7E 7F TOTAL SIZE 1 00 - 7F 00 00 Parameter MASTER TUNE MASTER VOLUME XG SYSTEM ON RESET ALL PARAMETERS Description -50 - +50[cent] 1st bit 3 - 0 ➝ bit 15 - 12 2nd bit 3 - 0 ➝ bit 11 - 8 3rd bit 3 - 0 ➝ bit 7 - 4 4th bit 3 - 0 ➝ bit 3 - 0 0 - 127 00=XG system ON 00=ON (receive only) Default value (H) 00 04 00 00 400 7F 07 *Values lower than 020CH select -50 cents.YAMAHA Implementation [ Electronic Piano ]Chart MIDI Model P-140 MIDI Implementation Function Date : 08-APR-2005 Version : 1.
Specifications / Technische Daten / Caractéristiques techniques / Especificaciones Keyboard GH keyboard 88 keys (A-1 – C7) Sound Source AWM Dynamic Stereo Sampling Polyphony (Max.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd.
Yamaha Home Keyboards Home Page (English Only) http://music.yamaha.com/homekeyboard Yamaha Manual Library http://www.yamaha.co.jp/manual/ This document is printed on chlorine free (ECF) paper with soy ink. Auf Umweltpapier mit Sojatinte gedruckt. Ce document a été imprimé sur du papier non blanchi au chlore avec de l'encre d'huile de soja. Este documento se ha impreso en papel sin cloro alguno, con tinta de soja. U.R.G.
