SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).
Introducción Enhorabuena por la selección de una Clavinova CLP-154S/155 Yamaha. Su Clavinova es un excelente instrumento musical que emplea tecnología musical de Yamaha avanzada. Teniendo el cuidado adecuado, la Clavinova le dará muchos años de placer musical. ● El sistema generador de tonos AWM (Memoria de ondas avanzada) Yamaha ofrece voces más ricas y reales. La CLP-155 caracteriza adicionalmente un muestreado estéreo de su voz PIANO 1 con un realismo y fuerza de expresión sin precedentes.
Indice El panel de control .......................................................... 2 Conexiones ....................................................................... 4 Selección e interpretación de voces .......................... 5 Empleo de la grabadora ............................................... 13 ■ Grabación ................................................................ 13 ● Cambio de los ajustes iniciales .......................... 14 ■ Reproducción de las canciones de demostración .....
El panel de control CLP-154S RECORDER REVERB MASTER VOLUME MIN MAX ROOM HALL 1 HALL 2 COSMIC MIDI/ TRANSPOSE 4 5 2 CLAVINOVA E. PIANO TONE PIANO 2 PIANO 1 HARPSICHORD 32 METRONOME ORGAN 6 TEMPO 120 7 280 1 2 PLAY REC 8 DEMO 9 0 1 RECORDER REVERB MASTER VOLUME MIN MAX ROOM HALL 1 HALL 2 COSMIC MIDI/ TRANSPOSE E2 F2 PIANO 1 PIANO 2 HARPSICHORD CLAVINOVA E.
1 Interruptor de alimentación [POWER] Presione el interruptor [POWER] una vez para conectar la alimentación, y otra vez para desconectarla. Cuando se conecte la alimentación, se encenderá el LED del selector de voz [PIANO 1] y se encenderá el indicador de la alimentación situado debajo del extremo izquierdo del teclado.
Conexiones CLP-154S 3 12 MIDI IN OUT THRU AUX IN R L AUX OUT R L/L+R CLP-155 3 12 MIDI IN OUT AUX IN THRU R 1 Tomas izquierda/derecha de de entrada auxiliar (AUX IN L y R) AUX IN R L DOU-10 L AUX OUT R L/L+R Estas tomas se utilizan para conectar un módulo generador de tonos externo como pueda ser la unidad de discos orquestales Yamaha DOU-10.
Selección e interpretación de voces ZConecte la alimentación Después de asegurarse de que la clavija de CA de la Clavinova está correctamente enchufada en un tomacorriente de CA adecuado, presione el interruptor [POWER], situado a la izquierda del teclado, para conectar la alimentación. Cuando se haya conectado la alimentación, se encenderá el LED del selector de voz [PIANO 1] (la voz de PIANO 1 se selecciona automáticamente al conectar la alimentación).
Selección e interpretación de voces Reproducción de las canciones de demostración La CLP-154S tiene 6 canciones de demostración y la CLP-155 tiene 8 canciones de demostración que demuestran de forma eficaz las capacidades de sonido. Aquí se indica cómo puede seleccionar y reproducir las canciones de demostración. ZActive el modo de Presione el botón [DEMO] para activar el modo de demostración; los selectores de voces parpadearán en secuencia.
El modo dual El modo DUAL hace posible tocar dos voces simultáneamente por todo el margen del teclado. Para activar el modo DUAL, presione simplemente dos selectores de voz al mismo tiempo (o presione un selector de voz mientras mantiene otro presionado). Los indicadores de voz de ambas voces seleccionadas se encenderán cuando el modo DUAL esté activado. Para volver al modo de interpretación normal de una voz, presione cualquier selector de voz sencillo.
Reverberación El botón [REVERB] selecciona cierto números de efectos de reverberación que usted podrá utilizar para mayor profundidad y fuerza de expresión. Para seleccionar un tipo de reverberación, presione el botón [REVERB] algunas veces hasta que se encienda el indicador correspondiente al tipo deseado (los indicadores se encienden en secuencia cada vez que se presiona el botón [REVERB]). No se producirá ninguna reverberación cuando todos los indicadores estén apagados. OFF ............
Brillo (CLP-155) El botón [BRILLIANCE] hace posible cambiar la tonalidad o “timbre” de la voz seleccionada para adaptarla a sus necesidades musicales. Se proporcionan tres ajustes: MELLOW (suave), NORMAL, y BRIGHT (brillante). Para seleccionar uno de estos ajustes, presione algunas veces el botón [BRILLIANCE] hasta que se encienda el indicador correspondiente al ajuste deseado. NORMAL ..... Este ajuste produce el tono “normal” de la voz seleccionada. BRIGHT .......
Sensibilidad de pulsación Se pueden seleccionar cuatro tipos diferentes de sensibilidad de pulsación - HARD (dura), MEDIUM (media), SOFT (suave) o FIXED (fija) para adaptar los distintos estilos de interpretación y preferencias personales. Los diferentes ajustes de sensibilidad de pulsación se seleccionan usando los botones [MIDI/TRANSPOSE] y [REVERB]. HARD (indicador ROOM) .......... El ajuste HARD requiere que se toquen las teclas con bastante fuerza para producir la sonoridad máxima.
Control del tono El control del tono hace posible afinar la Clavinova por un márgen de ±50 centésimas en aproximadamente intervalos de 1,2 centésimas. Cien “centésimas” es igual a un semitono, por lo que el margen de afinación proporcionado permite la afinación del tono total en un margen aproximado de un semitono. El control del tono es útil para afinar la Clavinova para adaptarla a otros instrumentos o música grabada.
El metrónomo y el control del tempo El metrónomo incorporado de la CLP-154S/155 es una característica útil para la práctica, y puede proporcionar además una sólida guía rítmica cuando se graba usando la característica de la grabadora, que se describe a continuación. El metrónomo El sonido del metrónomo se activa y desactiva mediante el botón [METRONOME].
Empleo de la grabadora La CLP-154S/155 incorpora una grabadora de dos pistas que le permite grabar lo que toque en el teclado para poder reproducirlo después. Puesto que dispone de dos pistas, podrá “sobreponer” una parte sobre otra, empleando una voz distinta, si así lo desea, para crear grabaciones de sonido rico y complejo. La característica de la grabadora es muy útil para un programa de estudio de teclado, porque le permite escuchar exactamente cómo suena lo que toca desde la perspectiva del oyente.
Empleo de la grabadora BDetenga la grabación RECORDER 1 2 PLAY REC Presione el botón [REC] o [PLAY] de RECORDER para detener la grabación. El indicador de la pista grabada se encenderá en verde para indicar que ahora contiene datos.
Funciones MIDI ● Breve introducción a MIDI Cable MIDI MIDI OUT MIDI IN DOU-10 Clavinova Datos que se están grabando Datos de reproducción Playback Data MIDI OUT MIDI IN MIDI OUT MIDI IN DOU-10 Clavinova MIDI, la Interfaz Digital de Instrumentos Musicales, es una interfaz de comunicaciones mundial que permite a los instrumentos y equipos musicales compatibles con MIDI compartir la información musical y controlarse entre sí.
Funciones MIDI ● Selección de canal de transmisión y recepción MIDI MIDI OUT MIDI IN DOU-10 Generador de tonos Tone Generator MIDI THRU (Ajustado para recibir en el canal 2 MIDI) MIDI IN Clavinova (Ajustada para recibir en el canal 1 MIDI) El sistema MIDI permite la transmisión y recepción de datos MIDI en 16 canales distintos. Se han implementado canales múltiples para permitir el control selectivo de ciertos instrumentos o dispositivos conectados en serie.
Otras funciones MIDI Las funciones MIDI listadas a la derecha se activan manteniendo presionado el botón [MIDI/TRANSPOSE] y presionando el selector de voz correspondiente. En las páginas siguientes se detalles más completos.
Funciones MIDI ● Activación/desactivación de cambio de control Normalmente, la Clavinova responde a los datos de cambio de control recibidos desde un teclado externo u otro dispositivo MIDI, causando que la voz seleccionada de la Clavinova quede afectada por ajustes de pedal y datos de “control” recibidos desde el dispositivo de control. La Clavinova también transmite información de cambio de control MIDI cuando se operan uno de sus pedales.
● Modo de desactivación de división y local izquierdo MIDI En el modo de división MIDI, una sección del teclado de la Clavinova se utiliza para tocar una voz de la Clavinova de la forma normal, y se utiliza la otra sección para tocar un segundo teclado o generador de tonos MIDI, como por ejemplo la unidad de discos orquestales DOU-10.
Funciones MIDI ● Transmisión de ajustes del panel (sólo CLP-155) Esta función hace que todos los ajustes de control de la Clavinova actuales (voz seleccionada, etc.) se transmitan a través del terminal MIDI OUT. Es particularmente útil para grabar interpretaciones en una grabadora de secuencias MIDI que se use para controlar la Clavinova durante la reproducción.
Reactivación de los preajustes de fábrica C7 POWER Todos los ajustes del modo dual, reverberación, brillo (CLP-155), sensibilidad de pulsación, y control del tono podrán reponerse a sus valores de preajuste de fábrica originales manteniendo presionada la tecla C7 mientras pone el interruptor [POWER] en ON. De este modo también se borran todos los datos de la grabadora.
1 A A B B C C D E D D 5 x 40 mm long gold screws Lange goldene Schrauben (5 x 40 mm) Vis longues dorées de 5 x 40 mm Tornillos dorados largo de 5 x 40 mm 6 x 18 mm round-head screws Halbrundschrauben (6 x 18 mm) Vis à tête ronde de 6 x 18 mm Tornillos de cabeza redonda de 6 x 18 mm NOTE E D x6 1 4 x 25 mm round-head screws Halbrundschrauben (4 x 25 mm) Vis à tête ronde de 4 x 25 mm Tornillos de cabeza redonda de 4 x 25 mm x4 3 x4 2 6 x 16 mm flat-head screws Senkschrauben (6 x 16 mm) Vis
2 3 D CLP-155 CLP-155 D C E 5 x 40 mm long gold screws 1 Lange goldene Schrauben (5 x 40 mm) 1 Vis longues dorées de 5 x 40 mm 1 Tornillos dorados largo de 5 x 40 mm 1 6 x 18 mm round-head screws 2 Halbrundschrauben (6 x 18 mm) 2 Vis à tête ronde de 6 x 18 mm 2 Tornillos de cabeza redonda de 6 x 18 mm 2 CLP-154S D CLP-154S D C E Assemblage du support de clavier REMARQUE • Nous ne vous conseillons pas d’essayer d’assembler le Clavinova seul.
4 CLP-155 CLP-154S B B D 4 x 25 mm round-head screws 3 Halbrundschrauben (4 x 25 mm) 3 Vis à tête ronde de 4 x 25 mm 3 Tornillos de cabeza redonda de 4 x 25 mm 3 D 4 x 25 mm round-head screws 3 Halbrundschrauben (4 x 25 mm) 3 Vis à tête ronde de 4 x 25 mm 3 Tornillos de cabeza redonda de 4 x 25 mm 3 Attach the center panel (B) to the side V panels (D). Schrauben Sie die Rückwand (B) an die V beiden Seitenwände (D).
5 A A CLP-154S CLP-155 D D A B 6 x 16 mm flat-head screws 4 Senkschrauben (6 x 16 mm) 4 Vis à tête plate de 6 x 16 mm 4 Tornillos de cabeza plana de 6 x 16 mm 4 D 6 x 16 mm flat-head screws 4 Senkschrauben (6 x 16 mm) 4 Vis à tête plate de 6 x 16 mm 4 Tornillos de cabeza plana de 6 x 16 mm 4 le panneau central (B) aux V Fixez panneaux latéraux (D) el panel central (B) a los V Acople paneles laterales (D).
6 CLP-154S CLP-155 A A A A Cord holder Kabelhalter Support de cordon Soporte del cable N Connect the pedal cord. N Schließen Sie das Pedalkabel an. Pass the pedal cord through the two cord holders on the side panel. Plug the free end of the cord into the connector on the bottom of the main unit (A).
7 C N Connectez le cordon du pédalier N Conecte el cable de los pedales. Faites passer le cordon du pédalier dans les deux supports de cordon situés sur le panneau latéral. La prise doit être branchée au connecteur correspondant situé à la partie inférieure du clavier (A).
MIDI Data Format/MIDI-Datenformat/Format des données MIDI/Formato de datos MIDI If you’re already very familiar with MIDI, or are using a computer to control your music hardware with computer-generated MIDI messages, the data provided in this section can help you to control the Clavinova.
(3) Special Control Data format: [F0H] -> [43H] -> [73H] -> [xxH] -> [11H] -> [0nH] -> [ccH] -> [vvH] -> [F7H] 43H : Yamaha ID 73H : Clavinova ID xx : 38H (CLP-154S ID), 38H (CLP-155 ID) 11H : Clavinova special control 0nH : Control MIDI change + channel number cc : Control number vv : Value cc Control Value [vv] 08H Dual Balance 00H : Left Voice Max. 7FH : Right Voice Max.
IMPORT ANT SAFETY INSTRUCTIONS INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK, AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST. WARNING- When using any electrical or electronic product, basic precautions should always be followed. These precautions include, but are not limited to, the following: 1.
FCC INFORM ATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
M.D.G., EMI Division © Yamaha Corporation 1994 VS31580 407POCP1.