User Manual

Recording Keyboard Performances

P-255 Owner’s Manual

Activate Record mode and select the

part whose settings you have changed.

Press the [REC] button followed by the [RIGHT]

or [LEFT] button. (If you have changed settings

common to both parts, select either the left or right

part.) Verify that the selected part’s button is flash-

ing in red.

If you wish to change the tempo, reverb, or effect,

please do so in this step.

To cancel the process without changing any set-

tings, press the [REC] button once again.

Save your changes.

Press the [PLAY/STOP] button with the [REC]

button held down. Dashes (“-”) will scroll across

the display to indicate that data is being saved.

When this process is complete, the message

“End” will be shown, followed by the song num-

ber. In addition, the instrument will automatically

leave Record mode.

• Take care not to play the keyboard or press the [PLAY/

STOP] button at this time. Either of these actions will

start recording and delete the data already recorded.

• You should never turn off the digital piano while dashes

(“-”) are scrolling across the display. Failure to observe

this precaution may result in all song data (page 21),

including Import Songs, being deleted.

NOTICE