Operation Manual

Using the Metronome

P-95 Owner’s Manual

ENGLISH

Using the Metronome

This instrument features a built-in metronome (a device that keeps an accurate tempo) that is con-

venient for practicing.

1. Press the [METRONOME] button

to turn on the metronome.

Start the metronome.

2. Press the [METRONOME] button

to stop the Metronome.

Setting the Time Signature

While holding down the [METRONOME] button,

press one of the A0–D1 keys.

The ﬁrst beat is accented with a bell sound and the rest with clicks. Default set is

0/4 (A0). In this setting, clicks sound in all beats.

The time signature can also be changed by the following operation.

While holding down the [METRONOME] button, press one of the voice buttons

(GRAND PIANO 1–PIPE ORGAN).

Adjusting the Tempo

The tempo of the metronome can be set from 32 to 280 beats per minute.

A number is assigned to each of the following keys.

While holding down the [METRONOME] button, press a sequence of F3–D4

keys to specify a three-digit number.

Key Time signature

A0 0/4

A#0 2/4

B0 3/4

C1 4/4

C#1 5/4

D1 6/4

TERMINOLOGY

Default setting:

The “Default setting” refers to the

factory setting obtained when you

ﬁrst turn on the power to the P-95.

A0 D1C0

0/4 2/4 3/4 4/4 5/4 6/4

Default setting (Metronome):

120

NOTE