Operation Manual

Recording Your Performance

P-95 Owner’s Manual

ENGLISH

Changing the Settings of the Recorded Data

The settings of the recorded data can be changed after the recording.

For example, after recording, you can change the voice to create a different ambience or adjust the

song tempo to your taste.

You can change the following settings.

1. Press the [REC] button to engage Record Ready

mode.

The [REC] lamp will ﬂash.

2. Change the settings via the panel controls.

For example, if you wish to change the recorded voice from [E.PIANO 1] to

[E.PIANO 2], press the [E.PIANO 2] button. When you wish to change the

damper/soft pedal depth, press and hold the pedal.

Be careful not to press the [PLAY] button or a key on the keyboard, either of

which will start recording and erase all previously-recorded data on the selected

part.

3. Press the [REC] button to exit Record mode.

Be careful not to press the [PLAY] button or a key on the keyboard, either of

which will start recording and erase all previously-recorded data.

• Voice selection

• Dual mode voices

• Sustain/soft pedal depth

• Tempo