User Manual

73
P-515 Owner’s Manual
Connections
3 AUX OUT [R] [L/L+R] jacks
These jacks let you connect this instrument to external powered speaker
systems, for playing in larger venues at higher volumes.
The [MASTER VOLUME] setting of this instrument affects the sound that is
output from the AUX OUT jacks. When the AUX OUT jacks of this instrument
are connected to an external speaker and you want to turn off the speaker
sound of the instrument, switch the “speaker” parameter to off via the “System”
menu: “Utility”  “Speaker” (page 101).
4 [AUX PEDAL] jack
An included FC4A foot switch, or a separately sold FC3A foot pedal or FC5 foot
switch can be connected to this jack.
For details on the functions assigned to the pedals, refer to “Pedal Function List”
(page 92). To select the function that will be controlled, use the “Aux Assign”
(page 99) in the “System” menu display.
5 MIDI [IN], [OUT] terminals
These terminals are used to connect external MIDI devices, such as a
synthesizer or a sequencer. For details, refer to “Connecting External MIDI
Devices” on page 80.
6 [USB TO HOST] terminal
This terminal allows connection to a computer or a smart device, such as an
iPhone/iPad. For details, refer to “Connecting to a Computer/Smart Device” on
page 75.
NOTE
Use only the [L/L+R] jack for
connection with a monaural
device.
NOTICE
•To avoid possible damage,
first turn on the power to the
instrument, then to the
external device. When turning
off the power, first turn off the
power to the external device,
then to the instrument. Since
this instrument’s power may
automatically be turned off
due to the Auto Power Off
function (page 15), turn off
the power to the external
device, or disable Auto Power
Off when you do not intend to
operate the instrument.
• Do not route the output from
the AUX OUT jacks to the
[AUX IN] jack. If you make
this connection, the signal
input at the [AUX IN] jack is
output from the AUX OUT
jacks. These connections
could
result in a
feedback
loop that will make normal
performance impossible, and
may even damage the
equipment.
NOTE
Use audio cables and adaptor
plugs having no (zero)
resistance.
NOTE
When you are monitoring the
sound output via the AUX OUT
jacks from headphones
connected to the instrument,
we recommend that you set the
Binaural Sampling and
Stereophonic Optimizer
functions to off. For details,
refer to page 17.
Instrument
AUX OUT Input jack
Powered speaker
Audio cable
Phone plug (standard) Phone plug (standard)
Audio signal
NOTE
• Connect or disconnect the
pedal when the power of this
instrument is turned off.
• Do not press the footswitch/
foot pedal while turning the
power on. Doing this
changes the recognized
polarity of the footswitch,
resulting in reversed
footswitch operation.