User Manual

Making Global Settings (Utility)
CVP-809/CVP-805 Reference Manual
105
Factory Reset — Restoring the Factory Programmed Settings
On page 1/2, checkmark the boxes of the desired parameters then touch [Factory Reset] to initialize the settings of the
parameters which are checkmarked.
NOTE If you want to delete all data in the User memory, format the memory via [Menu]  [Utility]  [Storage] (page 104).
Backup/Restore – Saving and Recalling Your Original Settings as a Single File –
For the items below, you can save your original settings to the internal User memory or USB flash drive as a single file for
future recall.
1 Make all desired settings on the instrument, then call up page 2/2 of the “Factory Reset/
Backup” display.
2 As necessary, connect a USB flash drive to the [USB TO DEVICE] terminal.
If you want to save all settings, you can only use the USB flash drive to save the data.
3 Touch [Backup] or [Save] of the desired item to save the data.
Factory Reset/Backup
System
Restores the System Setup parameters to the original factory settings. Refer to “Parameter Chart”
in the Data List (separate PDF) for details about which parameters belong to the System Setup.
MIDI
Restores the MIDI settings including the MIDI templates saved in the internal User memory to
the original factory status.
User Effect
Restores the User Effect settings including the following data to the original factory settings.
•
User Effect types (page 13)
• User Master EQ types (page 12)
• User Master Compressor types (page 16)
• User Vocal Harmony types (page 32)
• User Microphone Settings (page 27)
Registration
Turns off all the REGISTRATION MEMORY [1] – [8] lamps, indicating that no Registration
Memory Bank is selected although all the Bank files are maintained. In this status, you can create
Registration Memory setups from the current panel settings.
Favorite
Removes all files from the Favorite tab on the Voice Selection display and the Style Selection
display.