Manual

9
YAMAHA ORIGINAL DESIGN VIBRATO SYSTEM RM - Pro II / III (part 2)
9
Intonation Adjustment in Vibrato Bridge
1) Loosen the hexagonal screw located in front of each saddle
using the supplied hexagonal wrench. (illustration — D)
2) Use the hexagonal wrench to adjust the individual string
lengths. These screws are located directly below the string
mounting holes. (illustration — F)
3) When the intonation is correct, tighten the hexagonal screw
in front of each saddle to ensure that its position stays
stationary. (illustration — D)
Tension Adjustment in Vibrato Arm
Adjust the tension rotating the Arm Collar. (illustration — E)
Removing the Vibrato Arm
When you pop in/out the Vibrato Arm, please be sure to
loosen the Arm Collar first, and then pop in/out the Vibrato
Arm.
C
B
D
When Higher
than harmonic
Loosen
Tighten
Lower
Higher
When Lower
than harmonic
Loosen
Tighten
F
E
Loosen
Tighten