User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 5 Main panel window
Amp Editor Owner’s Manual
70
[No Assign]
No function will be assigned. This is the default value. Select this if you want to clear the function
assigned to a GPI IN port. The [Device], [Parameter], [Min], [Max], and [Trigger Type] fields are
unavailable.
[Scene Recall]
The specified scene will be recalled. Use [Device] to select the amplifier that will be controlled. If you
select “ALL,” all amplifiers connected to that device will be selected.
Use [Parameter] to specify the scene number that you want to recall.[Min] and [Max] are unavailable.
Use [Trigger Type] to specify how the input voltage from GPI IN will be applied to the parameter.
When is selected
The scene specified by [Parameter] will be recalled when the GPI IN input voltage changes from
below the center voltage to above it.
When is selected
The scene specified by [Parameter] will be recalled when the GPI IN input voltage changes from
above the center voltage to below it.
When is selected
Same as .
When is selected
Same as .
GPI IN input voltage
max
GPI IN input voltage
min
Center
voltage
Triggering occurs
GPI IN input voltage
max
GPI IN input voltage
min
Center
voltage
Triggering occurs