User Manual

1. Device Control
[Usage Example]
1 Device run mode query devstatus runmode
"normal"
"emergency"
"booting"
"update"
"diagnostics"
2 Device run mode notification NOTIFY devstatus runmode
"normal"
"emergency"
"booting"
"update"
"diagnostics"
3 Device error status query devstatus error
"none"
"warning"
"error"
"fault"
4 Device error status notification NOTIFY devstatus error
"none"
"warning"
"error"
"fault"
5
Device run mode
Device run mode change devmode
"normal"
"update"
6
Result and change notification character
encoding setting
scpmode encoding
"ascii"
"utf8"
7 Value notification mode setting scpmode valuetype
"raw"
"normalized"
8
Normalization resolution setting
scpmode resolution <resolution> ≧100
9
Keepalive activation setting
scpmode keepalive <Time interval[msec]≧ 1000
10
Remote control protocol version query
devinfo protocolver
"1.1.0"
11
Parameter set version query
devinfo paramsetver
"AMP:1.1.0,SPP:1.0.0,PCD:1.0.0,R2D:1.0.0"
12
Firmware version query
devinfo version
ex) "1.0.2"
13 Product name query devinfo productname
"PC412-D"
"PC406-D"
"PC412-DI"
"PC406-DI"
14
Device manufacturer information query
devinfo manufacturer
"Yamaha Corporation"
15
Device category query
devinfo category
"amplifier"
16
Device ID query
devinfo deviceid
"01" - "FE"
17
Device name(device label) query
devinfo devicename
ex) "FOH MAIN L"
18
Serial number query
devinfo serialno
ex) "302HX401023X"
19
Device control
Device identify request
identify
<duration> 0 - 60
20
Reboot request
reboot
<delay> 0 - 60
To get product name
devinfo productname
↓
OK devinfo productname "PC406-DI"
To get device run mode
devstatus runmode
↓
OK devstatus runmode "normal"
Notification on Device run
mode change
NOTIFY devstatus runmode "update"
To change keepalive setting
scpmode keepalive 10000
↓
OK scpmode keepalive 10000
responseCommand Option #1 Option #2
Case
No.
Device status
Device Information
Remote control run
mode