User Manual
4. AMP Preset Control
[Usage Example]
Response
Option #1 Option #2
min max remarks
1 Get current Preset number sscurrent_ex preset - - - -
<Index>
0: Factory Preset
1 - 32: User Preset
<Status>
unmodified
modified
2
Notify current Preset number change notification
NOTIFY sscurrent_ex preset <User Preset No.> -
1
32
3
Recall Preset
ssrecall_ex preset <User Preset No.> -
1 32
4
Notify Preset recall notification
NOTIFY ssrecall_ex preset
<User Preset No.> -
1 32
5
Store to specified Preset
ssupdate_ex preset <User Preset No.> -
1 32
6
Notify Preset change notification
NOTIFY ssupdate_ex preset <User Preset No.>
-
1 32
7
Get total Preset count
ssnum_ex preset - -
-
- 32(Fixed value)
8 Get Preset information ssinfo_ex preset
<User Preset No.>
0: Factory Preset
1 - 32: User Preset
-
0 32
<Index.>
0: Factory Preset
1 - 32: User Preset
<NumText>
1 - 32, A - E
<Title>
preset title
<Comment>
OFF: Unprotected
ON: Protected
<Attrb>
user : User Preset
empty: Unstored
9 Notify current Preset number change notification NOTIFY sscurrent_ex factory <Factory Preset No.> -
1 5
<Index.>
1: Factory Preset A
:
5: Factory Preset E
10 Recall Factory Preset ssrecall_ex factory <Factory Preset No.> -
1 5
<Index.>
1: Factory Preset A
:
5: Factory Preset E
11 Notify Factory Preset recall notification NOTIFY ssrecall_ex factory <Factory Preset No.> -
1 5
<Index.>
1: Factory Preset A
:
5: Factory Preset E
12
Get total Preset count
ssnum_ex factory -
-
- - 5(Fixed value)
13 Get Preset information ssinfo_ex factory <Factory Preset No.> -
1 5
<Index.>
1: Factory Preset A
:
5: Factory Preset E
<NumText>
A - E
<Title>
preset title
<Comment>
ON: Protected
<Attrb>
Preinst: Factory Preset
Case CommandNo.
sscurrent_ex <Category>
↓
OK sscurrent_ex <Category> <Index>
NOTIFY sscurrent_ex <Category> <Index>
ssrecall_ex <Category> <Index>
↓
OK ssrecall_ex <Category> <Index>
NOTIFY ssrecall_ex <Category> <Index>
Request of current preset number
Notification of current preset number.
Recall Preset
Notify Preset recall notification
Store to specified Preset
Notify Preset change notification
Get total Preset count
Get Preset information
Parameter
ssupdate_ex <Category> <Index>
↓
OK ssupdate_ex <Category> <Index>
NOTIFY ssupdate_ex <Category> <Index>
ssnum_ex <Category>
↓
OK ssnum_ex <Category> <Number>
Category
ssinfo_ex <Category> <Index>
↓
OK ssinfo_ex <Category> <Index> <NumText>
<Title> <Comment> <Attrb>