User Manual

5.6. USER EQ page
This page shows the EQ on/off status.
① EQ
This shows the EQ on/off status.
Use the channel select keys to select the channel that you want to operate, and then press the main knob to
access the USER EQ screen.
If you select multiple channels, the channels will be linked for you to specify the EQ.
1.
Use the channel select keys to select the channels that you want to link, and then press the main knob.
A screen for selecting the EQ copy-source appears.
2.
Turn the main knob to select the copy-source channel, and then press the main knob.
The EQ setting screen appears in the channel-linked state.en
① Channel
This shows the linked channel names. If all four channels are linked this indicates "ALL."
NOTE
• Link is defeated when you leave the EQ screen.
5. Panel operations
PC412-D PC412-DI PC406-D PC406-DI Owner’s Manual | 23