User Manual

7.3. AUTO SLEEP
This function conserves power by automatically putting the unit to sleep after the specified time elapses with no
input signal.
When an input signal is detected, sleep is automatically defeated.
① ON/OFF
If this is on, the unit automatically sleeps when there has been no input signal for the specified time.
② THRESHOLD
This specifies the threshold value in dBFS units at which the presence or absence of an input signal is
determined.
③ TIME
This specifies the time from when the input signal ceases until the unit enters sleep mode.
7. SETUP screen
PC412-D PC412-DI PC406-D PC406-DI Owner’s Manual | 35