User Manual

Number of hops
Latency
(ms)
21 or more
(or if problems occur)
5.0
NOTE
• If two patched devices have different latency settings, the slower setting applies.
• Depending on the state of the network, it might be necessary to increase the latency even if the
number of hops is low.
• If a problem occurs, choose 5.0 ms to check whether the latency setting is the cause of the problem.
④ ENCODING (display only)
⑤ SECONDARY (SECONDARY PORT)
This selects whether the two Dante ports are used for a redundant connection (REDUNDANT) or a daisy-chain
connection (DAISY CHAIN).
⑥ LABEL
This shows the Dante device label.
⑦ LOCK
This shows the Dante Device Lock status. This setting is made by the Dante Controller.
This indicates LOCKED if the setting is locked, or UNLOCKED if the setting is unlocked. If this is locked, Dante-
related settings cannot be changed.
⑧ DDM (Dante Domain Manager)
If there is a DDM server on the network or if joined to a domain, this indicates the status.
•
STATE: Indicates the state of domain connection.
DOMAIN Joined to a domain
DISCONNECTED Joined to a domain but not connected to the DDM server
UNMANAGED Not joined to a domain
• LOCAL: Indicates the access status of the Dante settings (including DANTE PATCH) of the unit currently
being operated.
READ WRITE Editable
READ ONLY Not editable
9. NETWORK screen
54 | PC412-D PC412-DI PC406-D PC406-DI Owner’s Manual