User Manual

12. Returning to the factory settings (initialization)
There are two ways to initialize this product.
12.1. By selecting MENU screen → UTILITY → INITIALIZE
1.
In the MENU screen, turn the main knob to select "UTILITY," and press the main knob to confirm.
The UTILITY screen appears.
2.
In the UTILITY screen, turn the main knob to select "INITIALIZE," and press the main knob to confirm.
The INITIALIZE screen appears.
3. Turn the main knob to choose the type of settings that will be initialized (multiple selections are
possible), and press the main knob to confirm.
The following table shows what can be initialized.
AMP/PROCESSING
PROCESSING
SETUP
UTILITY
AMP PRESET AMP PRESET
NETWORK
IP SETTING
DANTE SETTINGS, UNIT ID
NOTE
• AMP/PROCESSING is always initialized.
4. When you have finished making selections, turn the main knob to move to [OK], and press the main knob
to confirm.
5.
In the confirmation screen, turn the main knob to select "YES," and press the main knob to confirm.
When initialization is completed, the unit restarts automatically, and then enters the power-on state.
12. Returning to the factory settings (initialization)
68 | PC412-D PC412-DI PC406-D PC406-DI Owner’s Manual