User Manual

Included items (please check)

Documentation

• Quick start guide (this document)

This explains installation and basic use.

• Owner’s manual (HTML)

This explains all items necessary for setup and operation.

• ProVisionaire Amp Editor setup guide (HTML)

This explains how to use the ProVisionaire Amp Editor software to control this product from a computer.

About ProVisionaire Amp Editor

ProVisionaire Amp Editor is software that lets you use your computer to construct, monitor, and control a system of network-

capable amplifiers (such as the XMV series) including this product. ProVisionaire Amp Editor allows centralized monitoring or

control of multiple connected devices.

You can download ProVisionaire Amp Editor from the Yamaha Pro Audio website.

http://www.yamahaproaudio.com/

Firmware updates

This product is designed to allow its firmware to be updated in order to improve its operability, add functionality, or fix problems.

This product has the following two firmware items.

• Firmware of the unit itself

• Firmware of the Dante module

The process of updating the firmware of the unit itself is performed from ProVisionaire Amp Editor. The process of updating the

firmware of the Dante module is performed from Dante Firmware Update Manager.

For details on the update procedure and settings for the unit, refer to “ProVisionaire Amp Editor setup guide.”

It will be necessary to update other devices depending on the version of each device in the Dante network. For details, refer to the firmware

compatibility chart provided on the above Yamaha website.

• Power cord × 1

• Handles × 2

• Grill (L) × 1

• Grill (R) × 1

• Filter element (L) × 1

• Filter element (R) × 1

• Machine screws for handle (M5 × 12 mm) × 4

• Euroblock plug mini for GPI (8-pin) × 2

• Euroblock plug for analog input (3-pin) × 4 (PC-DI series only)

• Euroblock plug for speaker output (8-pin) × 1 (PC-DI series only)

• Cable ties × 4 (PC-DI series only)

• Quick start guide (this document)

NOTE