User Manual

TA3 TC3 SH3 SC3 Owner’s Manual
49
4
Other Important Functions (UTILITY)
 Sound settings
Function
No.
Description Setting
range
Default
setting
f$1
Binaural On/Off Turns the Binaural (or Stereophonic Optimizer)
function (page 19) on or off. When this function is on
and a piano Voice (PF1–PF5) is selected, the sound
from this instrument changes to the sound of Binaural
Sampling or the sound enhanced with the
Stereophonic Optimizer, allowing you to enjoy more
realistic sound even when listening with headphones.
NOTE
This is effective only when headphones are connected.
On/OFF On
f$2
Brilliance Adjusts the timbre brilliance of the entire keyboard
sound from mellow to bright.
−2 (Mellow)
–0 (Normal)
–+2 (Bright)
0 (Normal)
f$3
IAC On/Off IAC is a function which automatically adjusts and
controls the sound quality according to the volume of
the instrument. Even when the volume is low, it permits
both low sounds and high sounds to be clearly heard.
On/OFF On
f$4
IAC Depth Determines the depth of the IAC. The higher the value,
the more clearly the low/high frequencies sound at
lower volume levels.
−3–0–+3 0
f$5
Audio EQ Determines whether the optimum EQ (or Equalizer)
settings are applied for audio input sound from the
external device (such as a computer or a smart device)
or not. When this function is set to on, audio input
sound from the external device will be optimized to be
played on this instrument. We recommend that you
turn this function off when outputting audio input to an
external device along with the performance played on
the instrument.
NOTE
The phrase “audio input sound” here refers to audio data sent
to this instrument from external devices, such as a computer
or a smart device, when connecting the instrument with
devices via [AUX IN] jack, [USB TO HOST] terminal, wireless
LAN, or Bluetooth. For information on connecting to external
devices, refer to Chapter 5 (page 55).
On/OFF On
f$6
TransAcoustic
Resonance
Adjustment
Optimizes the resonance so that it sounds natural even
when the lid is closed (or open), while playing in the
TransAcoustic mode or Layer mode. Set it to “OPn”
when the lid is open, and to “CLS” when the lid is
closed.
OPn (Open)/
CLS (Close)
Upright
pianos: CLS,
Grand
pianos: OPn
f$7
TransAcoustic
Tone Control
Adjusts the tone of sounds from the soundboard in the
low (F4.7), mid (F4.8) or high (F4.9) frequency ranges,
while playing in the TransAcoustic mode or Layer
mode.
−12–0–+12 0
f$8
f$9
TA3 TC3 SH3 SC3
TA3 TC3 SH3 SC3
TA3 TC3 SH3 SC3