User Manual
Table Of Contents
- Table of Contents
- PRECAUTIONS
- NOTICE
- Information
- Main Features
- Getting Started
- 1 Preparing the Power Supply
- 2 Enjoy Playing the Piano
- 3 Playing Back and Recording Songs
- 4 Other Important Functions (UTILITY)
- 5 Connecting to Other Devices
- Appendix
TA3 TC3 SH3 SC3 Owner’s Manual
54
Initializing the instrument (Clearing the Backup data)
While holding down the highest key (C7), turn on the power by pressing the [P] (Standby/On) switch. “CLr” appears on
the display and the Backup data (see below) will be initialized. Note that the Character Code for Song files, Bluetooth
pairing information, and User Songs are not cleared.
NOTICE
While “CLr” is shown in the display, never turn off the power. Doing so may delete the User Song, or damage the internal
memory.
NOTE
If this instrument somehow becomes disabled or malfunctions, turn off the power to the instrument, and then perform the initialization
procedure; this may remedy the situation.
Backup data
The following settings, referred to as Backup data, are automatically saved to the internal memory of this instrument.
The Backup data and the User Songs saved to the internal memory will be retained even if the power is turned off.
• Bluetooth on/off (Function F7.5)
• Auto Power Off setting (Function F8.1)
• Mode setting for grand pianos when the power is turned on (Function F8.5)
• Backup (Voice/Others) settings (Function F7.3–F7.4)
• Character code for Song files (page 37)
• Bluetooth pairing information (page 59)
• (Backed up only when the Function F7.3 is On) Voice settings
* See description of F7.3 for details
• (Backed up only when the Function F7.4 is On) Performance settings * See description of F7.4 for details
TA3 TC3 SH3 SC3
Highest key (C7)