User Manual

TA3, TC3, SH3, SC3 MIDI Reference / MIDI-Referenz / Référence MIDI / Referencia MIDI
16
MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI
MIDI Parameter Change Table (DRUM SETUP)
TOTAL SIZE 10
TOTAL SIZE 0E
n: Drum Setup Number (0-1)
rr: note number (0D-5B)
In the following cases, the instrument will initialize all Drum Setups.
XG SYSTEM ON received
GM SYSTEM ON received
GM LEVEL 2 SYSTEM ON received
GS RESET received
DRUM SETUP RESET received (only when in XG mode)
NOTICE
When a part to which a Drum Setup is assigned receives a program change, the assigned Drum Setup will be initialized.
If the same Drum Setup is assigned to two or more parts, changes in Drum Setup parameters (including program changes) will apply to all parts to which it is assigned.
Address
(H)
Size
(H)
Data
(H)
Parameter Description
XG Default
(H)
MIDI
Reception
MIDI Transmission
Song Panel Song
3n rr 00 1 00-7F PITCH COARSE −64...0...+63 40
01 1 00-7F PITCH FINE −64...0...+63 [cent] 40
02 1 00-7F LEVEL 0...127 Depends on the note
03 1 00-7F ALTERNATE GROUP OFF, 1...127 Depends on the note
04 1 00-7F PAN RND, L63...C...R63 Depends on the note
05 1 00-7F REVERB SEND 0...127 Depends on the note
06 1 00-7F CHORUS SEND 0...127 Depends on the note
07 1 00-7F VARIATION SEND 0...127 7F
08 1 00-01 KEY ASSIGN SINGLE, MULTI 00
09 1 00-01 Rcv NOTE OFF OFF, ON Depends on the note
0A 1 00-01 Rcv NOTE ON OFF, ON 01
0B 1 00-7F LOW PASS FILTER CUTOFF FREQUENCY −64...0...+63 40
0C 1 00-7F LOW PASS FILTER RESONANCE −64...0...+63 40
0D 1 00-7F EG ATTACK RATE 64...0...+63 40
0E 1 00-7F EG DECAY1 RATE −64...0...+63 40
0F 1 00-7F EG DECAY2 RATE −64...0...+63 40
20 1 00-7F EQ BASS GAIN −12...+12 [dB] 40
21 1 00-7F EQ TREBLE GAIN −12...+12 [dB] 40
22 1 NOT USED
23 1 NOT USED
24 1 04-28 EQ BASS FREQUENCY 32...2.0k [Hz] 0C
25 1 1C-3A EQ TREBLE FREQUENCY 500...16.0k [Hz] 36
26 1 NOT USED
27 1 NOT USED
28 1 NOT USED
29 1 NOT USED
2A 1 NOT USED
2B 1 NOT USED
2C 1 NOT USED
2D 1 NOT USED