Pickup Mute™ Руководство пользователя PickupMute_JEDFES_1125.
Pickup Mute™ Thank you for purchasing the Yamaha SILENT BRASS™ Pickup Mute™. In order to obtain the maximum performance and enjoyment from your Pickup Mute™, we urge you to read this Owner’s Manual thoroughly before using. Please keep this Owner’s Manual in a safe place for later reference. Contents of Set ● Pickup Mute™ PM9/PM7/PM6/PM5/PM3/PM2/PM1 ● Cable ● Owner’s Manual * Personal Studio™ ST9 is not included. 11 PickupMute_JEDFES_1125.
■ Pickup Mute™ Specifications Pickup Mute™ Instrument Dimensions (diameter x length) Width at handle Weight PM9 Piccolo Trumpet 70 x 145 mm (2-3/4" x 5-11/16") — 80g (2.8oz.) PM7 Trumpet, Cornet 70 x 200 mm (2-3/4" x 7-7/8") — 120g (4.2oz.) PM6 Flugelhorn, Alto Trombone PM5 Trombone, Bass Trombone PM3 French horn PM2 Euphonium PM1 Tuba — 108 x 270 mm (4-1/4" x 10-5/8") — 270g (9.5oz.) 150mm 300g (10.5oz.) 190 x 410 mm (7-1/2" x 16-1/8") 220mm 800g (1lbs.,12oz.
Your Pickup Mute™ will give you years of reliable service if you follow the simple rules given below: ■ Location Do not expose it to the following conditions to avoid deformation, discoloration, or more serious damage. • Direct sunlight (e.g. near a window). • High temperatures (e.g. near a heat source, out side, or in a car during the daytime). • Excessive humidity. • Excessive dust. • Strong vibration. ■ Handling and Transport • Never apply excessive force to the controls, connectors or other parts.
Set up and Use ■ Personal Studio™ ST9 Connecting Cable Stereo Earphones PM7 for TRUMPET PM6 for FLUGELHORN PM5 for TROMBONE Lock Nut PM9 for PICCOLO TRUMPET Handle (P. 17) PM3 for FRENCH HORN Handle PM2 for EUPHONIUM 14 PickupMute_JEDFES_1125.
Before connecting the cable and attaching the Pickup Mute™, make sure the power is switched OFF and the earphones are removed from your ears. Stereo Earphones Head Connecting Cable ■ Assembling the PM1 Handle Lock Nut Body Inner Head 1. Lay the Head on the floor. Hook 2. PM1 for TUBA PickupMute_JEDFES_1125.indd 15 Place the Body on the Head and fasten with the three hooks. 3. Fully extend the Inner Head that is located in the center of the Head. * Refer to pg.
QUICK GUIDE Attaching and removing the Pickup Mute™ PM9/PM7/ PM6/PM5/PM3 As shown in the illustration, hold the instrument with your left hand and, while turning the Pickup Mute™, firmly insert it into the bell with your right hand. ■ Attach the Pickup Mute™ PM1 to the Tuba 1. Attaching the Pickup Mute™ to the Euphonium For Euphoniums, with the bell facing up, hold the PM2 by its handle in your right hand and firmly insert it into the bell. After assembling the PM1 (refer to pg. 15) lay it on its side.
Holding the Pickup Mute™ when playing the horn standing up The following cautions are for your own safety and to avoid possible damage to and malfunctioning of the equipment, and thus should be observed carefully. ● Firmly insert the Pickup Mute™ into the bell of the instrument. ● Avoid dropping the Pickup Mute™. Dropping the mute may result in damage. Also, shock to the ear from the noise produced by dropping the mute may result in damage to your hearing.
QUICK GUIDE Pickup Mute TM Stereo Earphones Insert firmly Signal path From OUTPUT/ PHONES ST9 To INPUT Don’t step on the cable * Personal Studio™ ST9 and stereo earphones are not included. Tighten the Lock Nut Connect the supplied cable to the Pickup Mute™ output jack and tighten the LOCK NUT. Disconnecting the cable while the power is ON may result in damage to the unit. The sudden noise may also may result in hearing impairments. Do not disturb your neighbours during late hours.
