Conference Phone User Manual
Table Of Contents
- Important Safety Instructions
- Caution: Read This Before Operating Your Unit.
- Contents
- Features
- About this Manual
- Preparation Procedure
- Configuring the Settings
- Setting the Menu List
- Registering the IP network information
- Setup of telephone function
- Configuring the sound settings
- Configuring the general settings
- Adjusting the ring tone volume
- Controlling the system using the remote operation function
- Configuring the backlight off setting
- Adjusting the LCD contrast
- Selecting the menu language (Language)
- Setting the date and time manually
- Setting the time zone
- Setting the daylight saving time
- Selecting the SNTP server for synchronization
- Selecting the SNTP synchronization interval
- Call history management
- Setting the password
- Calling a ProjectPhone system in the same subnet
- Setting the Date and Time
- Editing the Address Book
- Using the SIP Server
- Hierarchical Connection of Multiple ProjectPhone (Cascade Connection)
- Interlocked Connection of ProjectPhone Systems
- Connection Using Audio Connection Cables
- Updating the Firmware
- Troubleshooting
- Resetting this Unit
- Obtaining the Setting Information for Support on this Unit
- Confirming the System Log Message of This Unit (Syslog)
- Specifications
- Notes on Transferring/Disposing this Unit
![](/manual/yamaha/pjp-50r/conference-phone-user-manual/images/img-15.png)
Preparation Procedure
10
■ Telephone circuit: Setting the telephone
circuit type
To have communications through the telephone circuit, it
is necessary to set the type of the connected telephone
circuit.
1 Press repeatedly until the initial display
appears.
2 Press .
The menu screen appears.
3 Press or to select “Settings”, and then
press .
The “Settings” menu appears.
4 Press or to select “Phone”, and
press .
The “Phone” menu appears.
5 Press or to select “Dial Type”, and
press .
The “Dial Type” menu appears.
6 Press or to select the type of your
telephone circuit, and press .
• 20PPS: Select when your telephone circuit is a
pulse (20 pps) line.
• 10PPS: Select when your telephone circuit is a
pulse (10 pps) line.
• Pb (Default): Select when your telephone circuit is
a tone line.
y
• In general, “20PPS” is applicable to most pulse lines.
• If you do not know the type of your telephone circuit,
consult your telephone company.
7 Press or to select “Country Code” and
press .
THe “Country Code” menu appears.
8 Press or to select the country use this
unit , and press .
9 Press repeatedly until the initial display
appears.
3. Online
2. Call History
1. Settings
Menu
3. Sound Settings
2. Phone
1. Network Settings
Settings
3. Line Echo Cancel
2. Hooking Time
1. Dial Type
Phone
3. Pb
2. 10PPS
1. 20PPS
Dial Type
3. Germany
2. China
1. Canada
Country Code