Conference Phone User Manual

ManualsBrandsYamaha ManualsConference PhonePJP-50R

Table Of Contents

Important Safety Instructions
- For residents in California
- Important safety instructions
Caution: Read This Before Operating Your Unit.
- For U.K. customers
- Special Instructions for U.K. Model
Contents
Features
About this Manual
- Check the latest information
- About trademarks
- Supplied Accessories
Preparation Procedure
- To configure the settings from a PC
- To use this unit with a SIP server
- Notes on system connection
- Step 1: Connecting this unit
- Step 2: Registering the settings of this unit
- Step 3: Installing this unit in the conference room
  - About the installation environment
  - Position of the talkers
Configuring the Settings
- Configuring the settings using the keys on this unit
  - To return to the previous menu without saving the setting
- Configuring the settings using the Web menu
Setting the Menu List
- Registering the IP network information
- Setup of telephone function
- Configuring the sound settings
- Configuring the general settings
- Call history management
  - Checking the communication history of this system
- Setting the password
  - Setting the password
  - Deleting the password
- Calling a ProjectPhone system in the same subnet
Setting the Date and Time
- Setting the date and time manually
- Setting the date and time using the SNTP server
Editing the Address Book
- Registering a new address
  - To abort the registration
- Editing an existing address
  - To delete the information a registered communication destination
Using the SIP Server
- Registering the SIP server information
- Notes on SIP server operation
  - Calling another unit by dialing the user ID
- Display in SIP server operation
Hierarchical Connection of Multiple ProjectPhone (Cascade Connection)
- What is a cascade connection?
  - The maximum number of locations in a cascade connection
- Configuring the cascade settings
  - Setup of the cascade server
  - Setup of the cascade clients
- Communication using a cascade connection
- Display in cascade connection
Interlocked Connection of ProjectPhone Systems
- Connection
- Setup of the Master unit
- Setup of the Slave units
Connection Using Audio Connection Cables
- Connecting with a PC or TV conference system
  - Connection
  - Setup of this unit
- Connection of the headphone output and microphone input terminals
- Setting of PC
Updating the Firmware
- Software Licensing Agreement
- Updating the firmware automatically
  - To cancel the firmware downloading
  - Specifying the URL from which to download the firmware
- Updating the firmware manually
Troubleshooting
- Q1: LED indicators do not light up
- Q2: Web menu setting is not available
- Q3: A call cannot be made
- Q4: Other problems
Resetting this Unit
- Resetting using the keys on this unit
- To cancel resetting
- Resetting using the Web menu
Obtaining the Setting Information for Support on this Unit
- Obtaining the setting information
Confirming the System Log Message of This Unit (Syslog)
Specifications
Notes on Transferring/Disposing this Unit

Connection Using Audio Connection Cables

CONFIGURATIONS

English

7 In the “Sound recording” field, click

“Volume...”.

8 Select the input audio according to the

connection method.

Click.

Select either check box.