User`s manual
Table Of Contents
- Contents
- Introduction
- CONFIRMATION SOFTWARE LICENSE AGREEMENT
- About the Product
- Controls and Functions
- Installation and Initial Setup
- Automatic Setup by Auto Analyzer
- Using the Web Menu
- Setting the Password
- Setting the Date and Time
- Configuring the Network Settings
- Limiting Access to the Web Menu
- Controlling Echoes
- Controlling Acoustic Feedback
- Controlling Noises
- Adjusting the Input Gain Automatically (Auto Gain Controller)
- Adjusting the Input Gain for MIC/LINE INPUT
- Adjusting the Volume Level
- Using the Internal Mixer
- Configuring the Phantom Power Settings
- Configuring This Unit's Settings Automatically (Auto Analyzer)
- Turning On/Off the Audio Guidance
- Maintenance and Management
- Special Functions
- Changing the Screen Color
- Using the Latest Features
- Troubleshooting
- List of Error Messages
- Resetting the Settings of This Unit
- Support Information
- Specifications
22
Follow the procedure below to specify a default gateway for
this unit.
1 Click "IP Settings".
The "IP Settings" screen appears.
2 In the "Default Gateway" field, click
"Edit".
The "Default Gateway Settings" screen appears.
3 Select "Specify" and then enter the IP
address of the default gateway in the "IP
Address" field.
4 Click "Apply".
The confirmation screen appears.
5 Click "Close".
The "IP Settings" screen appears again.
2. Specifying a default gateway