User`s manual
Table Of Contents
- Contents
- Introduction
- CONFIRMATION SOFTWARE LICENSE AGREEMENT
- About the Product
- Controls and Functions
- Installation and Initial Setup
- Automatic Setup by Auto Analyzer
- Using the Web Menu
- Setting the Password
- Setting the Date and Time
- Configuring the Network Settings
- Limiting Access to the Web Menu
- Controlling Echoes
- Controlling Acoustic Feedback
- Controlling Noises
- Adjusting the Input Gain Automatically (Auto Gain Controller)
- Adjusting the Input Gain for MIC/LINE INPUT
- Adjusting the Volume Level
- Using the Internal Mixer
- Configuring the Phantom Power Settings
- Configuring This Unit's Settings Automatically (Auto Analyzer)
- Turning On/Off the Audio Guidance
- Maintenance and Management
- Special Functions
- Changing the Screen Color
- Using the Latest Features
- Troubleshooting
- List of Error Messages
- Resetting the Settings of This Unit
- Support Information
- Specifications
24
You can limit access to the web menu by PC's IP address or permit access to the web menu only from PCs in the same
network.
1 Click "System Settings".
The "System Settings" screen appears.
2 In the "HTTP Server" field, click "Edit".
The "HTTP Server Settings" screen appears.
3 Configure the access limitation settings.
Access Permission: Select an access condition from
"Permit all" (allow access from any address), "Same
segment" (allow access within the same network),
and "Permit specific host only" (allow access from
the specified IP address only).
Session Timeout: Specify a timeout period. You will
be logged out from the web menu if the specified
time passes after the last operation.
Display Name: Specify a name assigned to this unit.
To specify a name, select "Specify" and then enter a
desired name (up to 64 one-byte alpha-numerals).
4 Click "Apply".
The confirmation screen appears.
5 Click "Close".
The "System Settings" screen appears again.
Limiting Access to the Web Menu