User`s manual
Table Of Contents
- Contents
- Introduction
- CONFIRMATION SOFTWARE LICENSE AGREEMENT
- About the Product
- Controls and Functions
- Installation and Initial Setup
- Automatic Setup by Auto Analyzer
- Using the Web Menu
- Setting the Password
- Setting the Date and Time
- Configuring the Network Settings
- Limiting Access to the Web Menu
- Controlling Echoes
- Controlling Acoustic Feedback
- Controlling Noises
- Adjusting the Input Gain Automatically (Auto Gain Controller)
- Adjusting the Input Gain for MIC/LINE INPUT
- Adjusting the Volume Level
- Using the Internal Mixer
- Configuring the Phantom Power Settings
- Configuring This Unit's Settings Automatically (Auto Analyzer)
- Turning On/Off the Audio Guidance
- Maintenance and Management
- Special Functions
- Changing the Screen Color
- Using the Latest Features
- Troubleshooting
- List of Error Messages
- Resetting the Settings of This Unit
- Support Information
- Specifications
30
Follow the procedure below to adjust the volume levels of
the microphone and speakers connected to this unit.
1 Click "Sound Settings".
The "Sound Settings" screen appears.
2 In the "Level" field, click "Edit".
The "Level Settings" screen appears.
3 Configure the volume level of each
device.
: Select "MIC" or "LINE" depending on the
device connected to CONFERENCE OUT.
Slider bar: Adjust the volume level.
MUTE: Temporarily turn off (mute) the microphone
or speakers. To cancel the mute function, click
"MUTE" again.
Save: Save the volume settings to this unit's built-in
flash memory.
Adjusting the Volume Level