User`s manual
Table Of Contents
- Contents
- Introduction
- CONFIRMATION SOFTWARE LICENSE AGREEMENT
- About the Product
- Controls and Functions
- Installation and Initial Setup
- Automatic Setup by Auto Analyzer
- Using the Web Menu
- Setting the Password
- Setting the Date and Time
- Configuring the Network Settings
- Limiting Access to the Web Menu
- Controlling Echoes
- Controlling Acoustic Feedback
- Controlling Noises
- Adjusting the Input Gain Automatically (Auto Gain Controller)
- Adjusting the Input Gain for MIC/LINE INPUT
- Adjusting the Volume Level
- Using the Internal Mixer
- Configuring the Phantom Power Settings
- Configuring This Unit's Settings Automatically (Auto Analyzer)
- Turning On/Off the Audio Guidance
- Maintenance and Management
- Special Functions
- Changing the Screen Color
- Using the Latest Features
- Troubleshooting
- List of Error Messages
- Resetting the Settings of This Unit
- Support Information
- Specifications
31
CONFIGURATIONS
You can select whether to output audio input through MIC/LINE to LINE OUTPUT. You can configure the settings for
MIC/LINE IN1 and IN2 individually.
1 Click "Sound Settings".
The "Sound Settings" screen appears.
2 In the "Mixer" field, click "Edit".
The "Mixer Settings" screen appears.
3 Configure the internal mixer settings.
Output to LINE OUT: Select whether to output
audio input through MIC/LINE to LINE OUTPUT.
To output audio, select "Enable".
4 Click "Apply".
The confirmation screen appears.
5 Click "Close".
The "Sound Settings" screen appears again.
Using the Internal Mixer