User`s manual
Table Of Contents
- Contents
- Introduction
- CONFIRMATION SOFTWARE LICENSE AGREEMENT
- About the Product
- Controls and Functions
- Installation and Initial Setup
- Automatic Setup by Auto Analyzer
- Using the Web Menu
- Setting the Password
- Setting the Date and Time
- Configuring the Network Settings
- Limiting Access to the Web Menu
- Controlling Echoes
- Controlling Acoustic Feedback
- Controlling Noises
- Adjusting the Input Gain Automatically (Auto Gain Controller)
- Adjusting the Input Gain for MIC/LINE INPUT
- Adjusting the Volume Level
- Using the Internal Mixer
- Configuring the Phantom Power Settings
- Configuring This Unit's Settings Automatically (Auto Analyzer)
- Turning On/Off the Audio Guidance
- Maintenance and Management
- Special Functions
- Changing the Screen Color
- Using the Latest Features
- Troubleshooting
- List of Error Messages
- Resetting the Settings of This Unit
- Support Information
- Specifications
34
Follow the procedure below to turn on/off the audio guidance which notifies you of events during the auto analyzer
process. Also, you can set the volume level of the audio guidance.
1 Click "System Settings".
The "System Settings" screen appears.
2 In the "Audio Guidance" field, click
"Edit".
The "Audio Guidance Settings" screen appears.
3 Configure the audio guidance settings.
Guidance: Select whether to use the audio guidance.
To use the audio guidance, select "Enable".
Volum e: Select a volume level of the audio guidance.
4 Click "Apply".
The confirmation screen appears.
5 Click "Close".
The "System Settings" screen appears again.
Turning On/Off the Audio Guidance