User`s manual
Table Of Contents
- Contents
- Introduction
- CONFIRMATION SOFTWARE LICENSE AGREEMENT
- About the Product
- Controls and Functions
- Installation and Initial Setup
- Automatic Setup by Auto Analyzer
- Using the Web Menu
- Setting the Password
- Setting the Date and Time
- Configuring the Network Settings
- Limiting Access to the Web Menu
- Controlling Echoes
- Controlling Acoustic Feedback
- Controlling Noises
- Adjusting the Input Gain Automatically (Auto Gain Controller)
- Adjusting the Input Gain for MIC/LINE INPUT
- Adjusting the Volume Level
- Using the Internal Mixer
- Configuring the Phantom Power Settings
- Configuring This Unit's Settings Automatically (Auto Analyzer)
- Turning On/Off the Audio Guidance
- Maintenance and Management
- Special Functions
- Changing the Screen Color
- Using the Latest Features
- Troubleshooting
- List of Error Messages
- Resetting the Settings of This Unit
- Support Information
- Specifications
35
OPERATIONAL
MANAGEMENT
You can use various maintenance and management features of this unit with the web menu.
You can output a report that shows the configurations and
status of this unit as a text file.
1 In the web menu, click "Maintenance".
The "Maintenance" screen appears.
2 In the [Make Report] - [Output Reports to
File] field, click "Execute".
The "Output Reports to File" screen appears.
3 Right-click “Report File” and then select
"Save Target As".
4 Specify where to save the file and then
click "Save".
The report file is saved.
This unit internally manages configuration information
with a config file.
■ Viewing the configuration information
Follow the procedure below to display the current
configurations on the PC monitor.
1 In the web menu, click "Maintenance".
The "Maintenance" screen appears.
2 In the [Configuration Management] -
[Output Configuration to Window] field,
click "Execute".
The current configurations are displayed.
Maintenance and Management
Checking configurations and status Checking the configuration
information