User`s manual
Table Of Contents
- Contents
- Introduction
- CONFIRMATION SOFTWARE LICENSE AGREEMENT
- About the Product
- Controls and Functions
- Installation and Initial Setup
- Automatic Setup by Auto Analyzer
- Using the Web Menu
- Setting the Password
- Setting the Date and Time
- Configuring the Network Settings
- Limiting Access to the Web Menu
- Controlling Echoes
- Controlling Acoustic Feedback
- Controlling Noises
- Adjusting the Input Gain Automatically (Auto Gain Controller)
- Adjusting the Input Gain for MIC/LINE INPUT
- Adjusting the Volume Level
- Using the Internal Mixer
- Configuring the Phantom Power Settings
- Configuring This Unit's Settings Automatically (Auto Analyzer)
- Turning On/Off the Audio Guidance
- Maintenance and Management
- Special Functions
- Changing the Screen Color
- Using the Latest Features
- Troubleshooting
- List of Error Messages
- Resetting the Settings of This Unit
- Support Information
- Specifications
37
OPERATIONAL
MANAGEMENT
4 Enter a comment and then click "Apply".
You can input a comment if necessary. The comment
will be displayed under "Save Time" in the "Save/
Load Configuration" screen.
The confirmation screen appears.
5 Click "Close".
The "Maintenance" screen appears again.
■ Recalling configurations saved on this
unit
1 In the "Save/Load Configuration"
screen, click "Load" next to the desired
memory number.
The confirmation screen appears.
2 Click "OK".
The result confirmation screen appears.
3 Click "Close".
This unit restarts.