User`s manual
Table Of Contents
- Contents
- Introduction
- CONFIRMATION SOFTWARE LICENSE AGREEMENT
- About the Product
- Controls and Functions
- Installation and Initial Setup
- Automatic Setup by Auto Analyzer
- Using the Web Menu
- Setting the Password
- Setting the Date and Time
- Configuring the Network Settings
- Limiting Access to the Web Menu
- Controlling Echoes
- Controlling Acoustic Feedback
- Controlling Noises
- Adjusting the Input Gain Automatically (Auto Gain Controller)
- Adjusting the Input Gain for MIC/LINE INPUT
- Adjusting the Volume Level
- Using the Internal Mixer
- Configuring the Phantom Power Settings
- Configuring This Unit's Settings Automatically (Auto Analyzer)
- Turning On/Off the Audio Guidance
- Maintenance and Management
- Special Functions
- Changing the Screen Color
- Using the Latest Features
- Troubleshooting
- List of Error Messages
- Resetting the Settings of This Unit
- Support Information
- Specifications
39
OPERATIONAL
MANAGEMENT
■ Viewing the system logs
Follow the procedure below to display the system logs (up
to 500 lines) on the PC monitor.
1 In the web menu, click "Maintenance".
The "Maintenance" screen appears.
2 In the [SYSLOG Management] - [Output
SYSLOG to Window] field, click
"Execute".
The system logs are displayed.
■ Saving the system logs on your PC
Follow the procedure below to save the current system
logs as a text file.
1 In the web menu, click "Maintenance".
The "Maintenance" screen appears.
2 In the [SYSLOG Management] - [Output
SYSLOG to File] field, click "Execute".
The "Output SYSLOG to File" screen appears.
3 Right-click "SYSLOG File" and then
select "Save Target As".
4 Specify where to save the file and then
click "Save".
The SYSLOG file is saved.
■ Saving the system logs on this unit
Follow the procedure below to save the current system
logs to this unit's built-in flash memory.
1 In the web menu, click "Maintenance".
The "Maintenance" screen appears.
2 In the [SYSLOG Management] - [Save
SYSLOG] field, click "Execute".