User`s manual
Table Of Contents
- Contents
- Introduction
- CONFIRMATION SOFTWARE LICENSE AGREEMENT
- About the Product
- Controls and Functions
- Installation and Initial Setup
- Automatic Setup by Auto Analyzer
- Using the Web Menu
- Setting the Password
- Setting the Date and Time
- Configuring the Network Settings
- Limiting Access to the Web Menu
- Controlling Echoes
- Controlling Acoustic Feedback
- Controlling Noises
- Adjusting the Input Gain Automatically (Auto Gain Controller)
- Adjusting the Input Gain for MIC/LINE INPUT
- Adjusting the Volume Level
- Using the Internal Mixer
- Configuring the Phantom Power Settings
- Configuring This Unit's Settings Automatically (Auto Analyzer)
- Turning On/Off the Audio Guidance
- Maintenance and Management
- Special Functions
- Changing the Screen Color
- Using the Latest Features
- Troubleshooting
- List of Error Messages
- Resetting the Settings of This Unit
- Support Information
- Specifications
42
■ Saving the error history on this unit
Follow the procedure below to save the error history to
this unit's built-in flash memory.
1 In the web menu, click "Maintenance".
The "Maintenance" screen appears.
2 In the [Error History Management] -
[Save Error History] field, click
"Execute".
The "Save Error History" screen appears.
3 Click "Save".
The confirmation screen appears.
4 Click "Close".
The "Maintenance" screen appears again.
■ Saving the error history automatically
You can set the interval to automatically save the error
history to this unit's built-in flash memory.
The error history that has not been saved to the flash memory will
be cleared if this unit is turned off.
1 In the web menu, click "Maintenance".
The "Maintenance" screen appears.
2 In the [Error History Management] -
[Flash-Memory Save Interval] field, click
"Edit".
The "Error History Settings" screen appears.
Note