User`s manual
Table Of Contents
- Contents
- Introduction
- CONFIRMATION SOFTWARE LICENSE AGREEMENT
- About the Product
- Controls and Functions
- Installation and Initial Setup
- Automatic Setup by Auto Analyzer
- Using the Web Menu
- Setting the Password
- Setting the Date and Time
- Configuring the Network Settings
- Limiting Access to the Web Menu
- Controlling Echoes
- Controlling Acoustic Feedback
- Controlling Noises
- Adjusting the Input Gain Automatically (Auto Gain Controller)
- Adjusting the Input Gain for MIC/LINE INPUT
- Adjusting the Volume Level
- Using the Internal Mixer
- Configuring the Phantom Power Settings
- Configuring This Unit's Settings Automatically (Auto Analyzer)
- Turning On/Off the Audio Guidance
- Maintenance and Management
- Special Functions
- Changing the Screen Color
- Using the Latest Features
- Troubleshooting
- List of Error Messages
- Resetting the Settings of This Unit
- Support Information
- Specifications
44
You can protect the settings of this unit.
1 In the web menu, click "Maintenance".
The "Maintenance" screen appears.
2 In the [Special Functions] - [Config
Protection] field, click "Execute".
The "Config Protection" screen appears.
3 Click "Protect Set".
The confirmation screen appears.
4 Click "Close".
The protection is enabled and the "Maintenance"
screen appears again.
To disable the protection
1 In the [Special Functions] - [Config
Protection] field, click "Execute".
The "Config Protection" screen appears.
2 Click "Protect Release".
The confirmation screen appears.
3 Click "Close".
The protection is disabled and the "Maintenance"
screen appears again.
Special Functions
Protecting the settings