Precauciones ® No exponga la tarjeta Plus-in 2 la luz solar directa, alto grado de humedad, temperaturas ¢levadas, presencia excesiva de polvo o vibraciones intensas. ® Antes de manipular la tarjeta Plus-in, bogue una superficie metálica para descargar la posible electricidad estiptica acumulada en su cuerpo.
La versión PLG150-PF es una sofisticada tarjeta generadora de tonos que proporciona sonidos realistas de piano y otros teclados. Equipada con el sistema de generación de tonos MALAWI y de un verdadero muestreo estéreo, la tarjeta PLG150-PF ofrece voces instrumentales de excepcional riqueza, naturalidad y autenticidad para aumentar la paleta de sonidos de un dispositiva "nodriza”.
Para poder utilizar 1a tarjeta PLG150-PF ser necesario disponer de un sintetizador, generador de tonos o tarjeta de sonido compatible con el Sistema Plus-in de Síntesis Modular o el Sistema Plus-in XG. Los instrumentos compatibles son el Coxis, ¢l MU128 v el SW1000XG, El sintetizador, generador de tonos o tarjeta de sonido deber disponer ademas de una ranura o espacio libre para la insustancial de la PLG1S0-PE.
Todas las pan tafias de ejemplo agilizadas en Jas explicaciones siguientes han sido tomadas del Coxis. 1 Guise el boten UTILITARIO. A continuación aparecer fa pantalla del modo de utilidades. »MOSTRÓ TG Lol Hiriente Tune Sz PEA Gire el mando PEGA a la derecha hasta que aparezca "PLG150-PF” en la parte inferior izquierda de la pantalla. Siga girando el mando para seleccionar los distintos parámetros de Sistema PF, situados justo encima de los mandos C y 2.
Selección de voces. seleccione el manero de banco deseado. Mueva el cursor al parámetro de Rimero de Banco con los botones SELECTA 4/, y utilice fos botones VALUÉ I+ para seleccionar el banco deseado. Farden e minero de 5 seleccione el animero de voz deseado. Mueva el corros al parámetro de Rimero (Programa) de Voz con los botones SELECTA y utilice Jos botones VALUÉ para seleccionar la voz deseada.
tris de Partes Nativas PF Ne olvide que los valores y ajustes de parámetros representan desviaciones de los ajustes de voz reales. Esto quiere decir que el sonido real resultante de Jos ajustes realizados depender de los ajustes originales de la voz. También deber tener en cuenta que Se trata de parámetros de “Parte” y que, como tales, son temporales; simplemente alteran o desvían los ajustes de la voz seleccionada en ese momento. Los ajustes de voz originales se conservan en la memoria de modo permanente.
L W Basa Freo (frecuencia de graves) Margen: Este ajuste determina la frecuencia objeto del relee o recorte (del parámetro Basa Rain) para cada Parte. B Basa Rain (ganancia de graves) Margen: Este ajuste determina el nivel de la frecuencia seleccionada (en "Basa Frey"). Los valores positivos aumentan el nivel de la frecuencia seleccionada, v los valores negativos lo atedian.
I B AC1 EL1 Lev (Controlador Asignable 1 ~ Control de Nivel del Elemento 1) W AC2 EL2 Lev (Controlador Asignable 2 Control de Nivel del Elemento 3) M AC3 EL3 Lev (Controlador Asignable 3 Control de Nivel del Elemento 3) B AC4 EL4 Lev (Controlador Asignable 4 Contra de Nivel del Elemento 4) Margen: no disponible) Como s¢ ha explicado en EL1 EL4 Leve, Jas voces de la tarjeta PLG150-PF están constituidas per un máxime de cuatro elementos de sonido.
aria s o B Asignación de Partes (Par Asignas) Ajustes: 01 16, off Este parámetro determina la Parte a la que se asignar la voz de la tarjeta PLG150-PE. Si no se asigna correctamente una Parte en este parámetro, no se poded seleccionar ninguna voz de la PLG150-PF para 1 Parte en cuestión (esto es aplicable a fos dispositivos "nodriza” compatibles con el Sistema Plus-in XG). E@ Las voces de fa tarjeta PLEGÓ 504 B Curven (curva de velocidad de pulsación) Ajustes: Normal, Sofrito, Sofrito, Sofismo, Halar.