User Manual

Extended functionality for the attenuators

The functionality of the input channel attenuators has been expanded to allow cut/boost in a range of –96 to

+24 dB.

In previous versions, leaving a large margin in the analog domain for an input channel sometimes caused a

situation in which sufﬁcient input level could not be obtained even with the fader raised all the way. In V1.6,

this problem has been addressed by providing up to +24 dB of boost in the digital domain.

In order to let you rapidly set the attenuator for each input channel, a dedicated ATT screen for setting the

attenuators has been added to the INPUT EQ function.

In conjunction with this change, the [ATTENUATOR] encoder display in the SELECTED INPUT CHANNEL

has been changed as follows.

• Range of –96 dB to 0 dB

Same display method as previous.

• Range of +1 dB to +24 dB

The 0 dB LED will remain lit, and the LEDs at the

–96 dB side will light consecutively.

In the MIDI CTRL CHANGE screen (MIDI/GPI/

TC function), the variable range of the [INPUT CH

ATT] parameter that can be assigned to a control

change has also been extended to the range shown

above. Please note that this is not compatible with

the control change values in V1.5 and earlier.

ATTENUATOR