User Manual

Preset Effects Programs (added in V1.6)
49
Preset Effects Programs (added in V1.6)
• Basic effect programs
Dynamic Effects
Effects Parameters (added in V1.6)
• MULTI BAND DYNA. [Type: STEREO]
#Title Type Description
30
Multi Band Dyna.
MULTI BAND DYNA.
Multi-band dynamics processor
Parameter Range Description
LOW GAIN –96.0 - +12.0 [dB] Level of the low-frequency range
MID GAIN –96.0 - +12.0 [dB] Level of the mid-frequency range
HIGH GAIN –96.0 - +12.0 [dB] Level of the high-frequency range
PRESENCE –10 - +10
“+” settings lower the high-frequency threshold and raise
the low-frequency threshold. “–” settings do the opposite.
With a setting of 0, the high, mid, and low-frequency
ranges are all affected alike.
CMP.THRESHOLD –24.0 - 0.0 [dB] Compressor threshold level
CMP.RATIO 1:1 - 20:1 Compression ratio
CMP.RELEASE
5.0ms - 42.3s (@fs=48kHz),
6.0ms - 46.0s (@fs=44.1kHz)
Compressor release time
CMP.ATACK 0 - 120 [ms] Compressor attack time
CMP.KNEE
HARD, SOFT 1 - 5
Compressor knee
CMP.BYPASS OFF, ON Compressor bypass
LIM.THRESHOLD –24.0 - 0.0 [dB] Limiter threshold
LIM.RELEASE
5.0ms - 42.3s (@fs=48kHz),
6.0ms - 46.0s (@fs=44.1kHz)
Limiter release time
LIM.ATACK 0 - 120 [ms] Limiter attack time
LIM.KNEE
HARD, SOFT 1 - 5
Limiter knee
LIM.BYPASS OFF, ON Limiter bypass
LOOKUP DELAY 0.0 - 100.0 [ms] Lookup delay
L-M XOVER
21.2 - 8.00k [Hz]
Low/mid crossover frequency
M-H XOVER
21.2 - 8.00k [Hz]
Mid/high crossover frequency
CEILING –6.0 - 0.0 [dB], OFF Limiting value to prevent excessive output
BALANCE 0 - 100 [%] WET/DRY balance