User Manual

CS1D Operating Manual (Basic Operation)

Switching the channel assignments

When the PM1D system is in its initial state, MIX chan-

nels 1–24 are assigned to the MIX OUTPUT block.

However, this assignment can be changed as follows by

the MIX LAYER [1-24]/[25-48] switches of the MIX

OUTPUT block.

• Using the MIX LAYER [1-24]/[25-48] switches to

change the channel assignments

Similarly, MATRIX channels 1–12 are assigned to the

MATRIX block when the PM1D system is in its initial

state, but this assignment can be changed as follows by

the MATRIX LAYER [1-12]/]13-24] switches of the

MATRIX OUTPUT block.

• Using the MATRIX LAYER [1-12]/[13-24] switches

to change the channel assignments

If operating the MIX OUTPUT block

MATRIX

OUTPUT block does not produce the result you

expect, check that the above switches are set appro-

priately.

MIX

LAYER

MIX 1-12

MIX

LAYER

MIX 13-24

MIX 25-36

MIX 37-48

MIX OUTPUT block

MATRIX

LAYER

MATRIX

LAYER

MATRIX 1-12

MATRIX 13-24

MATRIX OUTPUT block