User Manual

CS1D Operating Manual (Basic Operation)
72
Basic operation of the STEREO OUTPUT block
This section explains basic operation of the STEREO OUTPUT block.
Controls and functions of the STEREO OUTPUT block
RCL
MUTE
SAFE
INS
SEL
TO MTRX
RCL
MUTE
SAFE
INS
SEL
MONO
10
5
5
0
10
20
30
40
50
60
10
5
5
0
10
20
30
40
50
60
CUE CUE
ON ON
ST OUTPUT
A
ST OUTPUT
B
STEREO A [TO MTRX] switch and
LED (STEREO A channel only)
This is an on/off switch for the signal
sent from the STEREO A channel to the
MATRIX buses. If this switch is off, no
signal will be sent from the STEREO A
channel to any MATRIX bus.
STEREO [SEL] switch and LED
This switch selects the STEREO A/B
channel that you wish to control. Each
time you press the STEREO [SEL]
switch, the L and R of that STEREO A/B
channel will alternate.
STEREO B [MONO] switch and LED
(STEREO B channel only)
This switches the STEREO B channel
between monaural output and stereo output.
STEREO fader
This 100 mm fader adjusts the output
level of the STEREO A/B channel.
STEREO [CUE] switch and LED
This switch monitors the STEREO A/B
channel.
STEREO SAFE [RCL] LED
This LED will light for STEREO A/B chan-
nels that are set to Recall Safe (a condition
in which the channel is independent of
scene recall operations).
STEREO SAFE [MUTE] LED
This LED will light for STEREO A/B chan-
nels that are set to Mute Safe (a condition
in which the channel is independent of mute
group operations).
STEREO [INS] LED
This LED indicates the insertion on/off
status of STEREO A/B channels.
STEREO [ON] switch and LED
This switch turns each STEREO A/B channel on/off individually. If this switch
is off, no signal will be sent to the output unit patched to the corresponding
STEREO A/B channel.